Handleiding
Je bekijkt pagina 51 van 96
3. Remove the Phillips M2.0 × 2.3 screw (3), and then pull the module out of the socket to remove it (4).
NOTE: The #1 white WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2
black WLAN antenna cable connects to the WLAN module #1 Aux terminal.
4. If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective
sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse this procedure.
Speakers
To remove the speakers, use this procedure and illustration.
Table 6-5
Speaker description and part number
Description Spare part number
Speaker Kit N36066-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 39).
44
Chapter 6 Removal and replacement procedures for authorized service provider parts
Bekijk gratis de handleiding van HP 250R G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | 250R G10 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12711 MB |
