Handleiding
Je bekijkt pagina 52 van 96
2. Remove the bottom cover (see Bottom cover on page 39).
3. Remove the battery (see Removing and reinstalling the same battery on page 33).
4. Remove the solid-state drive (see Solid-state drive on page 40).
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable between the speakers from the clips and tape that secure it to the computer (2).
3. Remove the two Phillips M1.6 × 2.5 screws (3) that secure each speaker to the computer.
4. Remove the speakers from the computer (4) .
To install the speakers, reverse this procedure.
Heat sink
To remove the heat sink, use this procedure and illustration.
Table 6-6
Heat sink description and part number
Description Spare part number
Heat sink N36067-001
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 39).
2. Remove the bottom cover (see Bottom cover on page 39).
3. Remove the battery (see Removing and reinstalling the same battery on page 33).
Remove the heat sink:
Heat sink
45
Bekijk gratis de handleiding van HP 250R G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | 250R G10 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12711 MB |
