Handleiding
Je bekijkt pagina 11 van 24
DISPLAY CODE/ISSUE
DETECTED
DESCRIPTION POSSIBLE CAUSES SOLUTION
A special function does
not turn on and the hob
produces an acoustic
signal.
The hob does not allow a special function to
be activated.
The power regulator limits the special
function activation in accordance with the
power management setting selected for the
hob (e.g. 2.5 kW).
See the “Power management“ section.
When you choose
a power level or
use the Booster
function, the power
level automatically
decreases.
The hob automatically sets the maximum
available power level (even lower than the
set one) to ensure that the cooking zone
can be used.
The power regulator limits the special
function activation in accordance with the
power management setting selected for the
hob (e.g. 2.5 kW).
The Booster function can have a different
duration depending on the zone used. After
the Booster time has elapsed, the power will
be automatically reduced to level 18.
Hob ventilation may not be adequate to
ensure the proper functioning of the hob.
See the “Power management“ or "Booster
function" section.
To ensure the appliance works properly, the
hob must receive adequate ventilation from a
sufficient fresh air supply. Check the hob has been
installed respecting the indications described in
the "Installation" section. Ensure that no object
is obstructing the rear and lower rear part of the
hob.
Cookware is not detected.
Cooking zone switches off after 30 seconds.
This symbol appears if the pot is not suitable
for induction cooking, is not positioned
correctly or is not of an appropriate size
for the cooking zone selected. If no pot is
detected within 30 seconds of making the
selection, the cooking zone switches off.
If your cookware is suitable for induction cooking
(see the "Accessories" section) and correctly
positioned on the required cooking zone, try
using it on a smaller cooking zone. Otherwise,
please use appropriate cookware (See the
"Accessories" section).
The hob makes two short
acoustic sounds and then
switches OFF by itself.
The "OFF" message is
subsequently displayed
for up to 60 seconds,
during which time the
hob cannot be turned
back on and it repeats
the two short acoustic
sounds every 5 seconds.
Water spillage, food overflow and/or an object positioned on the control panel buttons
can mimic your finger and accidentally activate or deactivate any of the hob buttons:
• the ON/OFF button, causing the hob to turn off unintentionally,
• the key-lock button, causing the unwanted activation of the key-lock function if
pressed continuously for more than 3 seconds. The function remains active even after
the hob has switched off, with the key-lock icon and LED on,
• the scroll keypad, causing the unwanted change of power levels.
The hob switches off by itself (showing the "OFF" message) if it is not cleaned within 8
seconds.
Dry and/or clean and/or remove the object so
the hob can be turned back on 60 seconds after
the OFF message appeared.
If the key lock function has been accidentally
activated, press the key-lock button for 3 seconds
to disable it.
Press the ON/OFF button to switch on the hob.
Water does not boil
when Heat Control (
)
is used.
Water does not boil when the temperature
is set using the Heat Control function.
You are using Heat Control to boil water.
Use Assisted Boil (Boil&Cook) or Booster function.
A clicking and/or tick-tack
sound is heard when
cookware is positioned.
These continuous clicking and/or tick-tack noises occur when the pan is not able to receive
the full power delivered for the power level set.
The pan diameter may be lower than the minimum indicated in the user manual for specific
cooking zones. Even if you use a pan with the correct dimensions, some pan models have a
base partially covered by metal inserts (or without an even ferromagnetic distribution), and
they do not always perform as expected.
Use a pan with a diameter larger than the
minimum indicated in the manual for the specific
cooking zones, or use a more high-performing
pan (refer to the "Accessories" section).
The hob is turned o.
The hob will automatically turn off in the following situations:
• In the event of water spillage, food overow, or objects positioned on the control
panel buttons that could accidentally activate the ON/OFF button. If these items
are not removed within 8 seconds, the hob will automatically switch o while
producing a sound.
• If there is no interaction with the control panel for more than 30 seconds, and no
cooking zone is active.
• If no cookware has been detected for more than 30 seconds and there has been
no interaction with the control panel for the same time.
• The maximum working time for a power level or function has elapsed, and there
has been no interaction with the hob for more than 30 seconds.
• Other cases not specied here.
See the "Daily use" section for further information.
Turn on the hob manually.
While using the Assisted
boil (Boil&Cook) function,
the water does not reach
boiling point.
or
Depending on the cookware or the amount of water used, boiling point might not be
reached.
Whether the water is boiling or not, the power level may automatically drop to 15 after
about 15 minutes from when the function is activated.
If the water is not boiling, bring it to the boil by
increasing the power level of the cooking zone in
use. Alternatively, you can try using another pan
suitable for induction cooking.
The function does not
indicate that boiling
point has been reached
within about 90 seconds
from when the water
starts to boil.
If the function does not indicate boiling within
about 90 seconds from when the water starts
boiling, we suggest you switch off the Boil&Cook
function and use power levels to continue
cooking.
Owner's manual
EN
Bekijk gratis de handleiding van Hotpoint HTX6014DNF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HTX6014DNF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3817 MB |
