Hotpoint HTX6014DNF handleiding

Fornuis

Hotpoint

24 pagina's

PDF beschikbaar

Handleiding

COOKING TABLE

The cooking table oers cooking tips for each power level. The actual power delivered for each power level depends on the cooking zone dimension and on the

cookware used.

POWER LEVEL COOKING TIPS

Maximum power (P) Booster* - Bring water to a boil as quickly as possible. Do not use with an empty pan or oil/butter.

17 − 18 Bring water to a boil, deep fry** frozen products.

15 − 16 Maintain a lively boil, sear, blister, stir-fry, brown.

10 − 14 Maintain a gentle boil, preheat, grill (for a long period of time), stir-fry, sauté, caramelise, brown, pancakes.

5 − 9 Simmer, stew, thicken, slow cook.

3 − 4 Keep warm, defrost.

1 − 2 Melting, creaming (risotto).

Zero power (OFF) Hob is in stand-by or o mode (possible end-of-cooking residual heat, indicated by “Hot“).

*Booster is a special mode that uses a power level higher than 18, to heat up water faster. This mode can be maintained for a maximum time of 10 min. depending

on the zone used. After this time, the power will be automatically reduced to level 18.

** For deep frying frozen products such as French fries, it is recommended to use non Flexi Zone cooking zones. If you want to deep fry using Flexi Zone cooking

zones, it is recommended to use the front one.

CLEANING AND MAINTENANCE

Important:

• Before cleaning, make sure the cooking zones are switched off and that

the residual heat indicator (“Hot“) is not displayed.

• Do not use abrasive sponges or scouring pads as they may damage the glass.

• After each use, clean the hob (when it is cool) to remove any food residue

deposits or stains.

• A surface that is not kept suitably clean may reduce the sensitivity of control

panel buttons.

• Only use a scraper if residue is stuck to the hob. Follow the scraper manufacturer's

instructions to avoid scratching the glass.

• Sugar or foods with a high sugar content can damage the hob and must be

removed immediately.

• Salt, sugar and sand might scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow the

manufacturer’s instructions).

• Liquid spills in the cooking zones can cause the pots to move or vibrate.

• After cleaning the hob, dry thoroughly.

TROUBLESHOOTING

• Check that the electricity supply has not been shut o.

• If you cannot to turn the hob o after using it, disconnect it from the power

supply.

• If alphanumeric codes appear on the display when the hob is switched on,

consult the following table for instructions.

Please note: The presence of water, or liquid spilled from pots or any objects

resting on a hob button, can accidentally activate or deactivate the control

panel lock function.

DISPLAY CODE/ISSUE

DETECTED

DESCRIPTION POSSIBLE CAUSES SOLUTION

F9E0 Wrong power cord connection.

The power supply connection is not exactly

as indicated in “Electrical connection“

section.

Make the power supply connection according to

the “Electrical connection“ section.

F0EA

The control panel switches off because of

excessively high temperatures.

The internal temperature of electronic parts

is too high.

Wait for the hob to cool down before using it

again.

F0E9

The power level

is automatically

decreased.

A cooking zone turns

OFF automatically.

The hob turns OFF

automatically.

The cooking zone turns off when the

temperatures are too high.

The power level is decreased, or the cooking

zone turns off or the hob turns off when the

temperatures are too high.

The internal temperature of electronic parts

is too high.

Hob ventilation may not be adequate to

ensure the proper functioning of the hob.

Wait for the cooking area to cool down before

using it again.

To ensure the appliance works properly, the

hob must receive adequate ventilation from a

sufficient fresh air supply. Check the hob has been

installed respecting the indications described in

the "Installation" section. Ensure that no object

is obstructing the rear and lower rear part of the

hob.

F0E2, F0E4, F0E6, F0E8,

F1E1, F2E1, F6E1, F6E2,

F7E5, F7E6, FCE1, FCE2,

FCE3

Disconnect the hob from the power supply.

Wait a few seconds (more than 10), then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

d E

[when the hob is off]

The hob does not heat up.

The functions do not come on.

DEMO MODE on.

Follow the instructions in the “First time use“

section.

Bekijk gratis de handleiding van Hotpoint HTX6014DNF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.