Hotone Ampero Mini handleiding
Handleiding
Je bekijkt pagina 7 van 53
Getting Started
5
Getting Started
1. Connecting your Device
Plug your guitar in to the Ampero Mini input jack and run a 1/4" mono cable
from OUTPUT to your amp. Please remember:
• Keep your amp volume down.
• Connect your cable to the amp’s FX Loop Return if it has one. See Suggested
Setups section.
• When connecting to stereo sound system, use a Y cable to split L/R channels.
2. Turn the Ampero Mini volume knob all the way down, then connect the power
supply to turn Ampero Mini on.
3. Calibrate the strings. Press and hold footswitch 1 and 2 together to turn on
the tuner. Pluck each string and tune until the pitch reaches the middle of the
screen and turns green, as below:
When finished, tap any footswitch to exit the tuner.
4. Select a patch: Tap footswitch 1 to move back through the patches, tap
footswitch 2 to move forward through the patches.
Bekijk gratis de handleiding van Hotone Ampero Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotone |
| Model | Ampero Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14049 MB |
