Hoshizaki HS-5234 handleiding
Handleiding
Je bekijkt pagina 6 van 6
6
2A8351-010
Wiring Instructions
If wire harness is already factory installed skip to step 19. Otherwise, continue to step 15.
15) Remove the control box cover. Next, route the wire harness into the control box through the hole with the appliance power cord.
See Fig. 10.
16) Connect the wire harness black (BK) ribbed wire to the terminal block line black (BK) bar.
17) Connect the wire harness black (BK) smooth wire to the terminal block neutral white (W) bar.
18) Attach the wire harness ground (BK) ring terminal to the unit ground screw. WARNING! Make sure grounding wires are attached
and secure.
Wire Harness
Terminal Block
Wire Harness
Black (BK)
Ribbed Wire
Terminal Block
Neutral White (W) Bar
Unit Ground Screw
Terminal Block Line
Black (BK) Bar
Wire Harness
Black (BK)
Smooth Wire
Wire Harness
Ground (BK) Wire
Wire Harness
Heated Overow Drain
Pan Power Cord
Control Box
Control Box
19) Plug the heated overow drain pan power cord into the wire harness connector. Secure the heated overow drain pan power cord to
the appliance main power cord with a nylon tie. See Fig. 11.
20) Place the wiring label supplied with this kit near the wiring label on the appliance.
21) Replace the control box cover in its original position.
Fig. 10
Fig. 11
Nylon Tie
Fig. 12
22) Move the appliance back to its original position. Ensure that the heated overow drain pan assembly does not make contact with the
back wall or another surface. Plug the appliance into the electrical outlet, then move the power switch to the "ON" position.
Appliance Power Cord
Appliance Power Cord
Bekijk gratis de handleiding van Hoshizaki HS-5234, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | HS-5234 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 790 MB |
