Hoshizaki HS-5234 handleiding
Handleiding
Je bekijkt pagina 2 van 6
2
2A8351-010
6) Once tight, replace the condensate pan and channel cover in their correct positions. Connect the silicone hose provided in this kit
onto the end of the drain tting. See Fig. 3. NOTICE! Be sure the drain boot is correctly positioned back into the condensate
pan.
7) Place the heated overow drain pan into the heated overow drain pan bracket. See Fig. 4.
Fig. 3
Drain Fitting
Condensate Pan
Drain Fitting
Silicone Hose
Drain Boot
Channel Cover
Fig. 4
Heated Overow
Drain Pan Assembly
Heated Overow Drain
Pan Bracket
Drain Fitting Nut
Drain Fitting
Fig. 2
Condensate Pan
Rubber Gasket
Condensate Pan
Drain Fitting
Overow Hole
5) Remove the drain tting nut from the drain tting provided in this kit, then apply thread sealant tape or thread sealant to the drain
tting. Place the drain tting into the overow hole from the outside. Next, place the rubber gasket and drain tting nut onto the drain
tting and tighten. See Fig. 2. Be sure the drain tting is facing down.
Rear
Front
Thread Sealant Tape
or Thread Sealant
Heated Overow
Drain Pan
Front
Rear
Model Shown: CF1S-FS
Bekijk gratis de handleiding van Hoshizaki HS-5234, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | HS-5234 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 790 MB |
