Hoshizaki AM-50BAK-AD handleiding
Handleiding
Je bekijkt pagina 43 van 46
43
D. Condenser
Check the condenser once a year, and clean if required by following the steps below.
More frequent cleaning may be required depending on location.
WARNING
• Move the control switch to the "OFF" position and unplug the appliance from the
electrical outlet before cleaning the condenser.
• To reduce the risk of electric shock, do not touch the control switch or plug with
damp hands.
• Condenser ns are sharp. Use care when cleaning.
1) Move the control switch to the "OFF" position and unplug the appliance from the
electrical outlet.
2) Remove the 2 screws securing the front panel, then remove the panel. See Fig. 49.
Front Panel
Louver
Fig. 49
Screws
Screws
Condenser
3) Remove the 2 screws securing the louver, then remove the louver.
4) Use a brush attachment on a vacuum cleaner to gently clean the condenser ns. Do not
use too much force, otherwise the ns could be damaged.
5) Replace the louver and front panel in their correct positions. Ensure that the screws are
securely in place.
6) Plug the appliance back in. Move the control switch to the "ICE" position to start the
automatic icemaking process.
Bekijk gratis de handleiding van Hoshizaki AM-50BAK-AD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | AM-50BAK-AD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3914 MB |
