Hoover HBR 410BL8-80 handleiding
Handleiding
Je bekijkt pagina 31 van 40
Many occuring problems could be solved by yourself without VSHFLƪF expertise. In case of
a problem please check all shown possibilities and follow below Instructions before you
contact an after sales service. See CUSTOMER SERVICE.
11.1 Information cod
WARNING!
f
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
f
Electrical equipment should be serviced only by qualiƪHGHOHFWULFal experts, because
improper repairs can cause considerable consequential damages.
f
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualiƪHG persons in order to avoid a hazard.
es
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
The remaining delay time will be 6 hours and 30 minutes.
Function child lock is activated.
11.2 Troubleshooting with display code
Problem Cause Solution
CLR FLTR
• Drainage error, water is not fully
drained within 6 minutes.
• Clean pump ƪlter
• Check drain hose installation.
E2
• Lock error.
• Shut the door properly.
E4
• Water level not reached, drain
hose is self-syphoning.
• Make sure that tap is fully opened and
water pressure is normal.
• Check the inlet hose installation.
E8
• Water protective level error.
• Contact the After sales service.
Door is closed because of high water level,high water temperature or spinning cycle.
7KHZDVKLQJF\FOHLVƪQLVKHG7KHDSSOLDQFHVKXWVRƩDXWRPDWLFDOly.
End
31
EN
11-Troubleshooting
Bekijk gratis de handleiding van Hoover HBR 410BL8-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoover |
| Model | HBR 410BL8-80 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5606 MB |
