Homedics TotalClean AP-T45WT handleiding

Handleiding

12345678/ 8

Afdrukken

Je bekijkt pagina 6 van 8

6 I GB

FILTER REPLACEMENT

REPLACE FILTER LIGHT

The replace lter light illuminates when it is time to replace the

HEPA-type lter based on the air purier’s hours of use.

REPLACING THE HEPA-TYPE FILTER

For optimal performance, replace every 12 months under normal

usage conditions.

UV-C BULB REPLACEMENT

REPLACING THE UV-C BULB

The UV-C bulb is designed to last for approximately 10,000 hours

of use. The UV-C button on the control panel will ash RED when

the UV-C bulb burns out and needs to be replaced. The UV-C button

will change to blue once the bulb has been replaced.

NOTE: The air purier will continue to operate without the UV-C

function when the UV-C bulb burns out.

CAUTION: Do not operate the air purier without the

protective UV-C bulb cover.

Unplug the power cord before servicing or replacing the

UV-C bulb.

1. Unplug the air purier

and remove the HEPA-type

lter. Using a Phillips-head

screwdriver (not included),

unscrew the 2 screws

located on the UV-C bulb c

over.

NOTE: The UV-C bulb contains mercury (Hg).

PARTICLE SENSOR CLEANING

NOTE: The particle sensor needs to be vacuumed monthly under

normal usage.

1. Unplug the air purier.

2. Remove the particle sensor door.

3. Vacuum the particle sensor using the brush attachment of your

vacuum cleaner.

4. Reattach the particle sensor door.

5. Plug the power cord into a household electrical outlet.

3. Gently push from the

sides and rotate the UV-C

bulb to remove.

4. Remove and replace the

UV-C bulb. Re-install the

UV-C bulb cover, HEPA-type

lter, and grille cover.

1. Unplug the air purier.

Pull the indents on each

side of the grille cover.

3. Pull the tabs to remove

the old lter.

5. Place the tabs at the

bottom of the grille cover

into the base of the air

purier. Gently push the

grille cover until it

snaps into place.

2. Remove the grille cover

and set aside.

4. With the lter tabs

facing outward, insert the

new HEPA-type lter.

6. Plug the power cord into

a standard AC outlet and

press the power

button

Press and hold the ioniser

ION button for 3 seconds

to reset the indicator.

2. Remove the cover to

expose the UV-C bulb.

12345678/ 8

Bekijk gratis de handleiding van Homedics TotalClean AP-T45WT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Homedics (Luchtreiniger)

Handleiding bekijken

Homedics TotalClean PetPlus AP-PET35

Luchtreiniger - handleiding

Handleiding bekijken

Homedics TotalClean AP-T30WT

Luchtreiniger - handleiding

Handleiding bekijken

Homedics TotalClean AP-T40

Luchtreiniger - handleiding

Andere merken in Luchtreiniger