Homedics MD-1000-AU handleiding
Handleiding
Je bekijkt pagina 6 van 8
6
AFTER TREATMENT COOLING SURFACE
• Press and hold the cooling button for 1 second.
A blue LED will glow indicating the cooling surface
is activated.
• Apply cooling surface to the treated area to soothe
the skin post-treatment.
• DO NOT hold the cooling surface on the same
area of skin for more than 10 seconds. The product
is designed to be moved continuously across the
surface of the skin.
• Press and hold the cooling button for 1 second to
turn the cooling surface o.
NOTE: the cooling surface is equipped with a 2.5
min auto-o feature.
NOTE: the cooling surface operates independently.
It is normal for the unit to feel warm when using the
cooling surface.
AFTER TREATMENT
• Press and hold the power button for 2-3 seconds
to turn o device.
• Wash your face with cold water to remove any
remaining dead skin cells and then apply your
preferred moisturiser. NOTE: Avoid using AHA (acid
based) moisturisers on the day of treatment.
• Depending on your skin type, you may experience
some reddening or increased sensitivity after
treatment. This is perfectly normal and usually
subsides within a few hours.
• Avoid direct sun exposure after treatment, consider
applying a stronger sunscreen as required.
• Always, dispose of the used black wool filter and
replace with a new filter ready for next use.
• Remove dead skin cells and debris from the diamond
tip using the brush provided. We also recommend
the periodic use of an ultrasonic cleaner for deep
cleaning the diamond tip, especially if it starts to feel
smooth or less eective.
OTHER TREATMENTS
Other areas of the body can also be treated 2-3 times
a week. For example, neck, chest, hands etc. When
treating larger areas, replace the black wool filter part
way through the treatment in order to maintain the
level of suction. Aim to cover the same area no more
than 2-3 times in one treatment.
FAQ:
HOW OFTEN SHOULD I USE THE PRODUCT?
It’s best to start slowly – usually just once a week, then
build up to 2 or 3 times a week if this is comfortable for
your skin.
WILL IT HURT?
No. Treatment should not be painful. Depending on the
sensitivity of your skin, you may feel slight discomfort
from the diamond tip as it moves across the skin and
there could be some short term redness or sensitivity
after treatment, but this will soon subside. If treatment
is uncomfortable, then you may need to use a lower
power setting or switch to the sensitive diamond tip.
CAN I USE THE PRODUCT IN COMBINATION
WITH ANTI-AGING CREAMS/SERUMS?
If your anti-aging cream or serum contains AHA (or
acid) then it should not be used on the same day as
the microdermabrasion treatment, but can be used on
non-treatment days. Non-AHA (acid free) anti-aging
products can be used at any time.
THE PRODUCT DOES NOT SWITCH ON
The power button has to be pressed continuously for
2-3 seconds to turn the product on. If you try this and it
still doesn’t work, then it may need recharging.
See ‘CHARGING THE BATTERY’
THE PRODUCT SEEMS TO BE LOSING POWER
This can happen if the black wool filter is not replaced
after each treatment. Try fitting a new filter. Also check
the tip to ensure that the plastic part of the tip has no
cracks or damage. Check that the two rubber o-rings
are in place on the nozzle end of the unit (where the
tip fits over).
THE DIAMOND TIP NO LONGER
SEEMS ROUGH
The diamond tip can accumulate skin cells over time
which may start to make it feel smooth and reduce its
eectiveness. If this happens we recommend cleaning
the diamond tip in an Ultrasonic Cleaner. These are
either available to purchase, or jewellery stores oer
a cleaning service. If using the product regularly you
may need to do this several times a year to maintain
optimum eectiveness.
MAINTENANCE & STORAGE:
TO STORE
Place attachments into their proper compartments
inside the storage case. Store case in a safe, dry place,
out of childrens reach.
TO CLEAN
Always unplug before cleaning the unit. Never use
liquids or abrasive cleaners to clean the housing of the
unit or case. Wipe o case with damp cloth.
Clean attachments periodically using detergent.
Allow attachments to dry before inserting them into
the hand unit.
Bekijk gratis de handleiding van Homedics MD-1000-AU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Homedics |
| Model | MD-1000-AU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 830 MB |
