Holzmann SSAT2200_230V handleiding
Handleiding
Je bekijkt pagina 18 van 29
TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 18
SSAT1000_230V | SSAT2200_230V
12.6 Hazard warnings
Residual risks
Despite intended use, certain residual risk factors remain.
Danger due to defects in the machine
If one or more parts of the machine are defective, the machine must not be used. Defective parts
must be replaced immediately.
Danger due to electric shock
Only operate the machine from a power source that is protected by an RCD! Sockets must be
installed, earthed and tested in accordance with regulations!
Danger from wood dust and dusts with fine particles
Inhaling wood dust or dust with fine particles is hazardous to health! Always wear a dust mask
when sanding and handling the blower. When disposing of waste chips and dust, ensure that they
are disposed of in an environmentally friendly manner!
Hazardous situations
Due to the structure and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factors in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
Transport the machine in its packaging to the place of installation. To manoeuvre the machine in
the packaging, a pallet truck or forklift truck with the appropriate lifting force (the fork must have a
length of at least 1200 mm) can be used, for example. The specifications can be found in the
chapter Technical data. For proper transport, also observe the instructions and information on the
transport packaging regarding centre of gravity, lifting points, weight, means of transport to be
used as well as the prescribed transport position etc. Ensure that the selected lifting equipment
(crane, forklift, pallet truck, load sling, etc.) is in perfect condition.
Lifting and transporting the machine may only be carried out by qualified personnel with
appropriate training for the lifting equipment used.
WARNING
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death.
Check hoists and load slings for adequate load-bearing capacity and perfect
condition. Secure the loads carefully. Never stand under suspended loads!
Bekijk gratis de handleiding van Holzmann SSAT2200_230V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | SSAT2200_230V |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6744 MB |