Holzmann RSM500 handleiding
Handleiding
Je bekijkt pagina 10 van 16
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 10
RSM500
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. Also observe
the symbols and pictograms used on the machine as well as the safety and danger
information!
10.1 Intended Use of the Machine
The machine is intended exclusively for the following activities:
Forming (stretching, rolling) of sheet metal workpieces, securely mounted on a workbench or a
work table within the technical limits in non-industrial use.
NOTE
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
10.1.1 Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
max. 65 %
Temperature (operational)
+5° C to +40° C
Temperature (Storage, Transport)
-20° C to +55° C
10.1.2 Prohibited Use / Forseeable Misuse
- Operation of the machine without adequate physical and mental aptitude
- Operating the machine without knowledge of the operating instructions
- Changes in the design of the machine
- Operating the machine in a potentially explosive environment.
- Operating the machine outside the limits specified in this manual
- Remove the safety markings attached to the machine.
- Modify, circumvent or disable the safety devices of the machine.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
10.2 User Requirments
The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the machinery
safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the operator and
restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
10.3 General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
• Before commissioning, check the machine for completeness and function. Only use the
machine if the guards and other non-parting guards required for machining have been
fitted, are in good operating condition and have been properly maintained.
• Choose a level, vibration-free, non-slip surface for the installation location.
• Ensure sufficient space around the machine!
• Ensure a clean working environment and sufficient lighting conditions at the workplace!
• Ensure adequate lighting conditions at the workplace!
• Only use perfect tools that are free of cracks and other faults (e.g. deformations).
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
• Check the strength of the machine connections before each use.
Bekijk gratis de handleiding van Holzmann RSM500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | RSM500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2958 MB |
