Holzmann EISA160-MINI handleiding
Handleiding
Je bekijkt pagina 31 van 35
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 31
EISA160MINI
16.1 Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
NOTE
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
Therefore, clean the device after each use of chips and dirt particles.
16.2 Maintenance
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless, any faults
or defects which may affect the safety of the user must be rectified immediately!
• Before each start-up, make sure that the safety devices are in perfect condition and
function properly.
• Check all connections for tightness at least once a week.
• Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
• Only use original spare parts recommended by the manufacturer.
16.2.1 Inspection and maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the specified limits:
Interval Component Action
Before start of work or
after every maintenance
or servicing
Cable and plug
Check for damage and replace if
necessary
Monthly Screw connections Check for tightness
If needed Cooling holes Cleaning
16.3 Storage
NOTE
Improper storage can damage and destroy important components. Only store packed
or unpacked parts under the intended environmental conditions!
Store the machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
16.4 Disposal
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he
is obliged in certain countries to dispose of your old machine properly.
Bekijk gratis de handleiding van Holzmann EISA160-MINI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | EISA160-MINI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6917 MB |
