Holzmann EISA160-MINI handleiding
Handleiding
Je bekijkt pagina 22 van 35
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 22
EISA160MINI
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified electrician
or under the instruction and supervision of a qualified electrician.
12.3 Safety devices
The machine is equipped with the following safety devices:
• Overload protection:
Warning lamp lights up in case of overload. Let the machine cool
down!
12.4 General safety information
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
• Before start-up, check the machine for completeness and function. Only use the machine if
the guards and other non-parting guards required for machining have been fitted, are in
good operating condition and have been properly maintained.
• Choose a level, vibration-free, non-slip surface for the installation location.
• Ensure sufficient space around the machine!
• Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
• Ensure a clean working environment.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
• Only use perfect tools that are free of cracks and other defects (e.g. deformations).
• Remove tool keys and other adjustment tools from the machine before switching it on.
• Check the machine connections for strength before each use.
• Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorised recommissioning.
• The machine may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the dangers arising during this work.
• Ensure that unauthorised persons maintain a safe distance from the machine and keep
children away from the machine.
• When working on the machine, never wear loose jewellery, loose clothing, ties or long, open
hair.
• Hide long hair under hair protection.
• Wear close-fitting protective clothing (flame resistant) and suitable protective equipment
(eye protection, welding helm, welding screen, ear protection, welding gloves, stout
footwear).
• Metal dust can contain chemical substances that can have a negative effect on health.
Work with the machine should only be carried out in well-ventilated rooms. If necessary,
use a suitable extraction system.
• If there are connections for dust extraction, make sure that they are properly connected
and in working order.
• Always work with care and the necessary caution and never use excessive force.
• Do not overload the machine!
• Shut down the machine and disconnect it from the power supply before carrying out any
adjustment, conversion, cleaning, maintenance or repair work
• Before starting any work on the machine, always wait until all tools or machine parts have
come to a complete standstill and secure the machine against unintentional restarting.
• Do not work on the machine if it is tired, not concentrated or under the influence of
medication, alcohol or drugs!
• Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
12.5 Electrical safety
• Make sure that the machine is grounded.
• Only use suitable extension cables.
Bekijk gratis de handleiding van Holzmann EISA160-MINI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | EISA160-MINI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6917 MB |
