Hobart LXNR-2 handleiding
Handleiding
Je bekijkt pagina 6 van 32
– 6 –
PLUMBING CONNECTIONS
Plumbing connections must comply with applicable sanitary, safety and plumbing codes.
Water Requirements
Proper water quality can improve ware washing performance by reducing spotting, enhancing effectiveness
of labor and extending equipment life. Water conditions vary from one location to another. The recommended
conditions. Ask your municipal water supplier for details about your local water conditions prior to installation.
Recommended water hardness is 3 grains of hardness per gallon or less. Higher hardness may cause excessive
formation of lime scale. Water hardness above 3 grains per gallon requires water treatment. Water treatment
has been shown to reduce costs associated with machine cleaning, reduce deliming of the dishwasher and
reduce detergent usage in the dishwasher.
levels in the water supply can cause pitting and may require a chloride removal system. Contact your local water
treatment professional for proper water treatment.
reverse osmosis system, etc. Contact your local water treatment professional for proper water treatment.
If an inspection of the dishwasher or booster heater reveals lime buildup after the equipment has been in service,
Water Supply Connection
A water hammer arrestor (meeting ASSE-1010 Standard or equivalent) should be installed (supplied by others)
in the common water supply line at the service connection.
The plumber connecting this machine is responsible for making certain that water lines are THOROUGHLY
matter; such as chips (resulting from cutting or threading of pipes), pipe joint compound from the lines; or, if
dishwasher's plumbing components and render them inoperative. Manual valves or solenoid valves fouled by
foreign matter and any expenses resulting from this fouling are NOT the responsibility of the manufacturer and
associated repair costs are not covered under warranty.
Water supply requirements are as follows:
WATER SUPPLY REQUIREMENTS
Model Sanitizing Mode Connection
Water Supply
Minimum Maximum Recommended
LXnC Chemical Sanitizing Hot Water 120°F (49°C) 140°F (60°C) 140°F (60°C)
LXnH Hot Water Sanitizing Hot Water 110°F (43°C) N/A 140°F (60°C)
LXnR Hot Water Sanitizing Cold Water 55°F (13°C) 80°F (27°C) 65°F (18°C)
LXGnPR Chemical Sanitizing Hot Water 120°F (49°C) 140°F (60°C) 140°F (60°C)
LXGnR Hot Water Sanitizing Cold Water 55°F (13°C) 80°F (27°C) 65°F (18°C)
NOTE: For LXnR or LXGnR installations, if cold water supply temperature is consistently above 80°F or if
excessive water vapor or steam is entering the room after the condensing cycle is complete, contact Hobart
Service to increase condensing time.
Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | LXNR-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4923 MB |
