Hobart LXNR-2 handleiding
Handleiding
Je bekijkt pagina 24 van 32
– 24 –
Manual Delime Process (Models LXnC, LXnH and LXGnPR)
Machine will prompt operator when to delime based on water hardness and machine usage. When prompted,
display will read 'Delime Required. Start Delime Cycle?'. If ready to delime, press either arrow button to
highlight Yes and press the Enter button. Press Enter button on No to delime machine later. If Yes is selected,
proceed to Step 3 below. Start process at Step 1 if initiating manual delime process without the prompt. If No
is selected, the machine will continue to notify the operator at each start-up and power down until the delime
cycle is completed.
1. Press the Menu button and scroll down until Delime Program is highlighted. Press the Enter button.
2. Display will prompt 'Start Delime Cycle?'. Press either arrow button to highlight Yes and press the Enter button.
3. Display will prompt 'Please clean strainer'. Open machine door and remove dish rack, strainer basket
and strainer pan. Clean basket and pan in a sink with a mild detergent and rinse.
4. Replace strainer pan and strainer basket in machine and ensure basket is in the locked position
(page 17, Fig. 5).
5. Close machine door and press the Enter button. Machine will drain. Once machine has drained, the
display will prompt 'Please add delime'. Open machine door and pour required amount of delime
chemical into wash tank according to chemical suppliers’ recommendation for 7.9-gallon wash tank
and close door.
a 10-minute wash cycle. Note: Enter button will not appear on display until door is opened and closed.
8. After 1-minute wash cycle, the machine will drain and power down.
NOTE: During delime cycle, 'DELIME' will appear on the display when not being prompted for user
interface.
Auto Delime Process (Models LXnR and LXGnR)
Machine will prompt operator when to delime based on water hardness and machine usage. When prompted,
display will read 'Delime Required. Start Delime Cycle?'. If ready to delime, press either arrow button to
highlight Yes and press the Enter button. Press the Enter button with No highlighted to delime machine later.
If Yes is selected, proceed to Step 3 below. Start process at Step 1 if initiating auto delime process without
the prompt. If No is selected, the machine will continue to notify the operator at each start-up and power
down until the delime cycle is completed.
NOTE: Machine will automatically pump delime solution into dish machine during auto delime cycle.
1. Press the Menu button and scroll down until the Delime Program is highlighted. Press the Enter button.
2. Display will prompt 'Start Delime Cycle?'. Press either arrow button to highlight Yes and press the Enter
button.
3. Display will prompt 'Please clean strainer'. Open machine door and remove dish rack, strainer basket
and strainer pan. Clean basket and pan in a sink with a mild detergent and rinse.
4. Replace strainer pan and strainer basket in machine and ensure basket is in the locked position
(page 17, Fig. 5).
5. Close machine door and press the Enter button. DELIME will be displayed and machine will drain.
Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | LXNR-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4923 MB |
