Hobart LXNR-2 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 32
– 21 –
CLEANING
The machine must be thoroughly cleaned at the end of each working shift or at least daily. Never use steel
wool to clean dish machine surfaces. Use only products formulated to be safe on stainless steel.
1. Press the PLAY/POWER button for 5 seconds (until progress bar is complete) to power the machine
down. The machine will automatically drain.
2. Once the display has powered off, open the machine door.
and mild cleanser. Rinse again.
4. On LXnC and LXnH models, remove the upper and lower wash and rinse arms by unscrewing the
thumb nuts (page 17, Fig. 6). On LXnR, LXGnR and LXGnPR models, remove the upper and lower wash
and rinse arms by pressing in on the buttons located on the sides of the center hub and pull off (page 17,
Fig. 7). Thoroughly wash and rinse the arms in a sink and ensure all debris is removed from the wash
and rinse arm nozzles.
Do not bang wash arms or rinse arms to clean.
5. Remove and empty the strainer basket and strainer pan. Wash and rinse thoroughly in a sink.
6. Clean tank bottom. Do not allow food soil to accumulate on the tank bottom or to enter the drain.
7. Reinstall the strainer pan and strainer basket. Ensure the strainer basket is in the locked position as
shown on page 17.
8. Reinstall the lower wash arm by pushing it down on the shaft. On LXnC and LXnH models, place
the lower rinse arm on the shaft and securely tighten the thumb nut. On LXnR, LXGnR and LXGnPR
models, press in on the buttons located on the sides of the center hub of the rinse arm and place the
rinse arm on the shaft and release the buttons. Spin the arms to ensure they spin freely. Repeat this
procedure with the upper wash and rinse arms.
9. Use a soft, damp cloth or sponge and mild cleanser to clean the display and exterior of the machine.
DO NOT use abrasive or harsh cleaners, scouring pads or steel wool.
10. Leave the door ajar overnight to allow the interior to air out and dry. The door design allows for the door
to remain partially open and can be used to vent the machine at the end of the day.

Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHobart
ModelLXNR-2
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4923 MB