Hobart AM16VL-ADV handleiding
Handleiding
Je bekijkt pagina 38 van 42
– 38 –
Error
No.
Text On Screen Error Description Troubleshooting
074 Detergent empty. Rell
detergent.
The detergent has not been
sensed for the set number
of consecutive cycles.
Ensure detergent is present in bottle and
that cap & tube are properly secured to
bottle. Replace detergent bottle if empty.
Press the ENTER button to prime the
detergent pump. Repeat as required.
075 Rinse aid empty. Rell
rinse aid.
The rinse aid has not been
sensed for the set number
of consecutive cycles.
Ensure rinse aid is present in bottle and that
cap & tube are properly secured to bottle.
Replace rinse aid bottle if empty. Press the
ENTER button to prime the rinse aid pump.
Repeat as required.
076 Sanitizer empty. Rell
sanitizer.
The sanitizer has not been
sensed for the set number
of consecutive cycles.
Ensure sanitizer is present in bottle and that
cap & tube are properly secured to bottle.
Replace sanitizer bottle if empty. Press the
ENTER button to prime the sanitizer pump.
Repeat as required.
077 Detergent empty. Machine
locked.
Detergent has not been
sensed for three consecu-
tive cycles.. The machine
will be locked out until
detergent is replaced.
Ensure detergent is present in bottle and
that cap & tube are properly secured to
bottle. Replace detergent bottle if empty.
Press the ENTER button to prime the
detergent pump. Repeat as required.
079 Sanitizer empty. Machine
locked.
Sanitizer has not been
sensed for three consecu-
tive cycles. The machine
will be locked out until
detergent is replaced.
Ensure sanitizer is present in bottle and that
cap & tube are properly secured to bottle.
Replace sanitizer bottle if empty. Press the
ENTER button to prime the sanitizer pump.
Repeat as required.
080 Delime required. Run de-
lime cycle.
If delime lockout is enabled,
machine will lock out due
to delime reminder being
ignored 10 times.
Press the DELIME button and run a delime
cycle to reset the delime reminder.
081 Final rinse temperature too
high.
Final rinse temperature is
239°F/115°C or greater.
Press and hold the power button for 5
seconds to clear the error. The machine will
drain and power off. If the error persists,
contact Hobart Service.
082 Final rinse temperature too
low.
Final rinse temperature is
32°F/0°C or lower.
Press and hold the power button for 5
seconds to clear the error. The machine will
drain and power off. If the error persists,
contact Hobart Service.
083 Minimum nal rinse tem-
perature not reached.
The nal rinse temperature
did not reach minimum nal
rinse temperature after
three consecutive cycles.
Press the ENTER button to clear the error. If
the error persists, contact Hobart Service.
084 Minimum nal rinse tem-
perature not reached.
Machine locked.
If nal rinse lockout is
enabled and the nal rinse
temperature did not reach
minimum nal rinse
temperature after three
consecutive cycles, the
machine will lock out.
Press and hold the power button for 5
seconds to clear the error. The machine will
drain and power off. If the error persists,
contact Hobart Service.
Bekijk gratis de handleiding van Hobart AM16VL-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | AM16VL-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7974 MB |
