Hobart AM16VL-ADV handleiding
Handleiding
Je bekijkt pagina 17 van 42
– 17 –
Testing Sanitizer (Chemical Sanitizing Machines)
1. Place a serving bowl or mixing bowl upside down
on a rack and run it through a cycle.
2. After cycle, dip a sanitizer test strip into the water
collected on the surface of the bowl.
3. Compare the test strip to the test scale provided with
your testing kit (Fig. 11). If the sanitizer level is out of
limits (i.e. below 50 ppm or above 100 ppm), adjust
the dosing. Refer to Chemical Pump Programming
(page 15), for adjustment instructions, or contact
your chemical provider.
DETERGENT AND RINSE AID DISPENSERS (FOR MACHINES WITH CHEMICAL PUMPS
SUPPLIED BY OTHERS)
Tubing Installation
Detergent and rinse aid dispensers not provided by Hobart must have all connections sealed
against leakage.
The AM16 Series dishwashers use 0.67 gallons of rinse water per rack at a ow rate of 4.02
gallons per minute. This information is used when setting the detergent and rinse aid pumps.
NOTE: All AM16 models utilize a pumped rinse system; pressure gauge is not required.
Fig. 11
5. After pressing ‘Enter’ for the last digit, use the down arrow and scroll until ‘chemical
menu’ is outlined. Press Enter.
6. Scroll down until ‘Prime Chemical Pumps’ is outlined. Press Enter.
7. ‘priming suction hose detergent’ is displayed. Use the arrow keys to select yes or no to
prime the detergent pump. Press Enter button.
8. ‘priming suction hose rinse aid’ is displayed. Use the arrow keys to select yes or no to
prime the rinse aid pump. Press Enter button.
9. ‘priming suction hose sanitizer’ is displayed. Use the arrow keys to select yes or no to
prime the sanitizer pump. Press Enter button.
10. ‘lling chemical hoses’ is displayed and the appropriate chemical pump(s) set to ‘yes’ in
Steps 7 - 9 will prime for 20 seconds and display will revert back to the ‘chemical menu’.
11. To exit the menu, use the Up and Down Arrows to scroll thru the parameters until ‘back’
is outlined and press the ‘Enter’ button. Repeat this procedure until the Ready screen
is displayed.
Bekijk gratis de handleiding van Hobart AM16VL-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | AM16VL-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7974 MB |
