Hobart 6430 handleiding
Handleiding
Je bekijkt pagina 14 van 60
– 14 –
PEELERS
The peeler may be positioned on the peel trap in one of four positions. Each of the positions will
cause the peel trap drawer to be located in a dierent position relative to the discharge chute.
The peel trap drawer may be directly beneath the discharge chute, to the right, left or rear (see
Fig. 7).
After selecting the most convenient position for the peel trap drawer, remove the cover disc from
the appropriate hole in the peel trap top and position the peeler on top of the peel trap, with the
peeler drain hose extending through selected hole (Fig. 7).
The cloth bag shipped in the peel trap drawer contains the capscrews, lockwashers and washers
(Fig. 1) necessary for fastening the peeler to the peel trap.
Excessive tightening of screws may distort the housing.
If desired, the peel trap legs may be bolted to the oor.
PLUMBING
Plumbing connections must comply with applicable sanitary, safety and plumbing
codes.
Peeler Unit
Using the supplied acorn nuts and gasket, attach the ll tube and bracket assembly (Fig. 1) to
the peeler.
Connect a cold water supply to the
1
/2” ll tube coupling (Fig. 1).
NOTE: A globe valve for controlling water supply should be installed in the water supply line at
a location convenient to the operator.
Bekijk gratis de handleiding van Hobart 6430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | 6430 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8849 MB |
