HK Audio DSP Control handleiding
Handleiding
Je bekijkt pagina 8 van 17
- 8 -
Manual 1.2DSP CONTROL
• Deutsch • English
High Pass and Low Pass Filters
You can also configure HPFs and LPFs individually. To do so, simply
enter the frequency to the respective input box.
• The HPF and LPF buttons activate the filters.
• The frequency (Freq) range sweeps from 20 to 20,000 Hz.
• Select the filter Type in the Type drop-down menu.
Your options are:
Butterworth, Linkwitz-Riley, Bessel
EQ Display
The EQ display shows the frequency curve for the given equalizer
settings. Edit the EQ bands’ frequency and gain by moving the EQ
points graphically.
Screen Tools
There are five icons on the left of the EQ display:
The magnification arrow zooms the EQ display up to the size
of the SPEAKER window. Click it again to zoom the readout up to the
size of the full screen.
Click the gray X icon in the upper left corner of one of the
extended views to shrink the graphical panel back down to the
standard size..
The camera icon takes a screenshot that you can save in a
PNG image file.
The magnifying glass helps you make very fine adjustments.
It zooms in to blow the cursor’s movements up so you can draw EQ
curves with even greater precision.
The T(ext) icon superimposes the parameters of the active EQ
bands/filters on the EQ display. This comes in very handy when you
have zoomed up the screen.
Delay
Adjust the delay time with the fader or by
entering a value to the input box. You can
choose to work with feet, inches, m, mil,
mm, ms and s as your units.
Speaker Limiter
Adjust the limiter threshold with the
fader or by entering a value to the input
box. The threshold can range from –30
to 0 dBu.
HK Audio engineers have fine-tuned all
other limiter parameters to the connected
network-controlled speaker, which is why
you cannot adjust these factory defaults.
Speaker
The big fader and the input box above it
serve to adjust the input channel’s level.
The LED display gives you visual feedback
as to the incoming signal’s level. The
control range sweeps from –60 to 0 dB.
Mute
The Mute button silences the channel
without changing the level settings.
Invert
The Invert button reverses the channel’s
polarity. The button lights up yellow
when the polarity is reversed 180°.
DSP OUT Window
DSP OUT is an XLR port that serves to integrate an added powered
speaker lacking network connectivity. You can then control this
speaker’s volume, filtering, limiting and delay independently.
For example, this option lets you run LINEAR 7 mid/high units
and LINEAR SUB bass bins or LINEAR 3 models and LINEAR 7
subwoofers together in the same network.
The DSP OUT window lets you configure the signal sent to the DSP
OUT port, for example, to adjust settings for a model of subwoofer
that is not a member of the LINEAR 7 family. This window provides
the same control features as the SPEAKER window. Its settings only
aect the DSP OUT port, and not the speaker’s response.
Bekijk gratis de handleiding van HK Audio DSP Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | DSP Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6688 MB |
