HK Audio DSP Control handleiding
Handleiding
Je bekijkt pagina 6 van 17
- 6 -
Manual 1.2DSP CONTROL
• Deutsch • English
Heads up: You can disengage this lock by selecting the Unlock Unit
menu option in the software or by pressing and holding the Preset
button on the speaker for three seconds.
Click Hardware > Lock Unit to lock the controller.
Click Hardware > Unlock Unit to unlock the controller.
•
Set Pin
Hardware > Set Pin serves to protect the selected speaker with a
PIN code. The protection mechanism activates once you quit DSP
CONTROL. The next time DSP CONTROL launches and detects the
speaker in the network, you will have to enter the assigned PIN
code before you can edit the speaker’s settings.
Help
•
About
This option lets you view specifications such as the firmware version
and speaker type designation, and learn more about the connected
unit and software.
Click Help > About to view this information.
3.3 Unit Control Windows
The left panel with the three big buttons that select MAIN,
SPEAKER and DSP OUT never changes.
MAIN Window
The MAIN window tells you how the connected speakers are
configured and lets you adjust various settings.
It has four panels:
• SYSTEM (1)
• SPEAKER (2)
• DSP OUT (3)
• LIMITER ACTIVITY (4)
•
System Panel
This panel aords you access to the following functions:
Presets Local
The Store button saves the current software settings to the hard
disk or another storage medium.
The Load button uploads settings from your hard disk or other
storage medium to the software.
Presets Unit
Use this text box to name your presets.
You can select one of up to ten available presets in the selection
box.
The Store button saves the current software settings on the
speaker.
The Load button uploads settings stored in the speaker’s memory
to the software.
Good-to-know info about managing presets:
Every network-compatible speaker comes with three fixed factory
presets and open memory slots for custom settings. The three
factory presets’ default settings are read-only. However, you can load
factory presets and use them as templates for editing and then save
the edited version as a dierent preset.
The network-compatible speakers in the LINEAR 5
MK II series have a
special feature in this respect. If one of the first three factory presets
(FLAT, BOOST, LOW CUT) is selected as a template for creating
a preset, the default settings of the selected preset are used as
a starting point. To visibly show which preset was taken as the
starting point, the initial preset is displayed under Output Filter. We
recommend starting with FLAT as the initial preset. There are a total
of ten presets visible in the list. It is not possible to overwrite the
first three presets. You can assign settings as you see fit to memory
slots four to ten. They only way to load and switch user presets is
remotely via DSP CONTROL.
The memory location four oers a special feature. If this is occupied
in the DSP CONTROL software, the preset can be stored on the
speaker and called up directly on the speaker via the preset selection
on the back of memory location four (remote) using a pushbutton
(see the respective manual for the speaker).
Link
If you wish to control more than one speaker with this application,
select the speaker you want to edit from the Link selection list.
Unit Name
Displays the name of the speaker currently being edited. You can
also rename the selected speaker in this input box.
Bekijk gratis de handleiding van HK Audio DSP Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | DSP Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6688 MB |
