Hitachi RAK-QH24PCBST handleiding

50 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 50
– 15 –
AIR FLOW LOUVERS ADJUSTMENTS
1
2
Adjustment of the conditioned air to the left and right.
Hold the second vertical air de ector of each set of vertical
air de ectors from right as shown in the gure and adjust the
conditioned air to the left or right.
If the “ (AUTO SWING (HORIZONTAL))” button
is pressed once, the horizontal air de ector swings up
and down. If the button is pressed again, the de ector
stops in its current position. Several seconds (about 6
seconds) may be required before the de ector starts to
move.
Use the horizontal air de ector within the adjusting range
shown on the right.
When the operation is stopped, the horizontal air de ector
moves and stops at the position where the air outlet
closes.
!
CAUTION
In “Cooling” operation, do not keep the horizontal air
de ector swinging for a long time. Some dew may form
on the horizontal air de ector and dew may drop.
Adjustment of the conditioned air in the upward and downward
directions.
The horizontal air de ector is automatically set to the proper
angle suitable for each operation. The de ector can be swung
up and down continuously and also set to the desired angle
using the “
(AUTO SWING (HORIZONTAL))” button.
A
Do not insert a nger, a rod or other objects into the air outlet or inlet as the fan is rotating at a high speed,
it will cause injury. Before any cleaning or adjusting the de ectors, be sure to switch OFF the operation.
!
WARNING

Bekijk gratis de handleiding van Hitachi RAK-QH24PCBST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHitachi
ModelRAK-QH24PCBST
CategorieAirco
TaalNederlands
Grootte6659 MB