Handleiding
Je bekijkt pagina 7 van 50
– 7 –
Use the device for cooling when the outdoor temperature is 21 ~ 46°C.
If indoors humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit.
Press the selector button so that the display indicates
(COOL).
Set the desired FAN SPEED with the button (the display
indicates the setting).
(AUTO) : The FAN SPEED is HI at fi rst and varies to
MED or LOW automatically when the preset
temperature has been reached.
(HI) : High fan speed.
(MED) : Medium fan speed.
(LOW) : Low fan speed.
(SILENT) : Silent fan speed.
Set the desired room temperature with the TEMPERATURE button
(the display indicates the setting).
The range of 25 ~ 28°C is recommended as the
room temperature for cooling.
If the temperature setting is 27°C, the room
temperature will be controlled at around 27°C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
■ As the settings are stored in memory of the remote controller, you only
have to press the (START/STOP) button to repeat the same
settings next time.
1
2
START
3
COOLING OPERATION
HI fan speed mode selected
When unit has been operating for a long period of time and the difference between remote controller
setting temperature and actual room temperature is continuously large, the fan speed may increase causing
higher air blow sound.
During the time, cooling capacity will be maximized. If the air blow sound causes any discomfort, please
select “AUTO” or other than “HI” fan speed.
NOTE
Press the button. Cooling operation starts with a beep.
Press the button again to stop the operation.
Bekijk gratis de handleiding van Hitachi RAK-QH10PCBST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | RAK-QH10PCBST |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6659 MB |
