Handleiding
Je bekijkt pagina 72 van 84
72
TROUBLESHOOTING
(
Continued
)
Symptoms
Checks Possible Cause
Frost and/or condensation formed
There is frost,
condensation, or ice
on the inside of the
refrigerator or slide
door frame.
Condensation
adheres to the
outside of the
refrigerator.
Was one the Refrigerator Compartment doors or slide doors temporarily left partially open?
When closing slide doors and doors, make sure that no food or bags are caught, and close them properly.
Did you open one of the doors for a long time
or did you open and close it too frequently?
When a door is opened or closed, water in the air may cling to the walls
or parts in the Freezer in the form of frost or ice. Open and close the
doors quickly, or reduce the frequency of opening and closing the
doors. Wipe off any frost or condensation with a dry cloth.
Is the air surrounding the refrigerator humid?
Condensation may adhere to these parts when the indoor humidity is
high (e.g. rainy day). Wipe off the condensation with a dry cloth.
Pg
.46
There is condensation on the back of
the refrigerator and the walls.
Is the humidity around the refrigerator too high or is the gap
between the back of the refrigerator and the wall too narrow?
Keep the back of the refrigerator at least 2 cm away from the wall.
Indicator is blinking
All the indicators
are blinking.
Is the door opened?
Is the door opened due to food stuck in between?
Close the opened-door.
Remove the food stuck inbetween and close the door properly.
When the temperature is set to “ ” , condensation
may be formed on the surface of the doors. Set the temperature
to
“ ”. Wipe off the condensation with a dry cloth.
Is the temperature set to
“ ”
?
Pg
.52
There is condensation
inside the Refrigerator
Compartment.
Did you open one of the doors for a long time
or did you open and close it too frequently?
Condensation may form on the walls and/or around
the Cold Air Blowout Port when the doors
are opened and closed frequently or when the humidity
is high around the refrigerator. It does not indicate
any fault. Wipe off the condensation with a dry cloth.
Condensation
Pg
.52
The lit lamps
are changing
continuously.
The refrigerator is in Store mode Cancel this mode.
The refrigerator does not cool in Store mode.
Open the Refrigerator Compartment doors (left and right) and the Freezer
Compartment lower door.
Touch on the Control Panel to light up the display.
Touch and hold for 10 seconds or longer until you hear two short
beeps.
All the indicator lamps light for a few seconds, Store mode is released,
and cooling operation resumed.
Close the Refrigerator Compartment doors (left and right) and the Freezer
Compartment lower door.
(Checklist)
For energy saving/freezer/refrigerator,
check
each of the seven lamps
“
/ / ”
to see if they are blinking
or off.
3 or more temperature
control lamps for energy
saving/freezer/refrigerator
are blinking
.
Place a mark on which lamps are
blinking and contact a Hitachi customer
service center for repair.
If you record the information, the problem
will be communicated accurately.
Pg
.84
Pg
.67
Did you place food or ice other than ice made by
the automatic ice maker in the Ice Compartment?
Food, etc. may be blocking the ice tray.
Empty the Ice Compartment and perform “Ice Maker Cleaning”.
“Auto Ice On” indicator
lamp blinking or
“ / ” and “ ”
indicator lamp blinking
Ice Maker Cleaning is in progress. The indicator lamps will
stop blinking in about 4 minutes. Do not open any of the
refrigerator doors while the indicator lamps are blinking.
Did you touch and hold
for 5 seconds
or longer?
The Ice Maker “Quick Ice”,
“Auto Ice On”, and “Auto Ice Off”
indicator lamps blink simultaneously.
Bekijk gratis de handleiding van Hitachi R-GW670TV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hitachi |
| Model | R-GW670TV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15601 MB |