Hisense WF5I8043 handleiding
Handleiding
Je bekijkt pagina 43 van 50
DRY FAULT (FOR TUMBLE DRYER MODELS)
appliance does
not carry out
drying process
Poor drying effect
Odour during drying
Excessive drying
time
Check whether the drying program is set up.
Check whether the water tap is unopened.
Check whether the door is properly closed.
Check whether the load is excessive (see PROGRAM
TABLE for capacity requirements), and take out part of
the laundry to dry again.
Check whether the load is excessive. lf so, it will cause
unsatisfactory drying effect and increased wrinkling. Separate
the laundry in the drum for individual drying.
Check if heavier items (e.g., thick cotton) are mixed with lighter
ones (e.g., synthetic fabrics).
Dry laundry separately by type.
Check whether the load is excessive (see PROGRAM
TABLE for capacity requirements), and take out part of the
laundry to dry again.
Laundry is not sufficiently spun (see section “Poor spinning
effect" for guidance).
A large amount of thicker laundry (e.g., jeans).
Using detergents or softeners with strong chemical odours
may cause odours during drying.
If the appliance is not thoroughly cleaned, residual dirt may
produce odours while drying. Clean the appliance regularly
(see chapter “MAINTENANCE AND CLEANING”) and
promptly remove laundry after drying.
Fault phenomenon Recommended countermeasures
43
Bekijk gratis de handleiding van Hisense WF5I8043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | WF5I8043 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4237 MB |
