Hisense WF5I8043 handleiding
Handleiding
Je bekijkt pagina 15 van 50
CONNECTING TO WATER SUPPLY
The supplied water supply hose varies by model. Please choose the appropriate connection method
based on the actual water supply hose.
EUROPEAN
WATER SUPPLY
HOSE CONNECTION
AQUA STOP
CONNECTION
CHINESE WATER
SUPPLY HOSE
CONNECTION
For normal appliance operation, the pressure in the water mains should be between 0.1-1MPa (1-10
bar; 1-10 kp/cm²; 10-100 N/cm²). Minimum dynamic water pressure can be determined by measuring the water
flow. In 15 seconds, 3 litres of water should flow from a fully open tap.
Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.
Make sure the hose is not damaged. lf the hose is degraded, brittle, or cracked, it has to be replaced.
This appliance is designed for cold water only. Do not connect it to hot water.
Tighten the water supply hose by hand to ensure proper sealing (maximum torque: 2 Nm). Check the
sealing for leaks.
Do not use pliers or similar tools as they may damage the nut threads.
EUROPEAN WATER SUPPLY HOSE CONNECTION
15
Bekijk gratis de handleiding van Hisense WF5I8043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | WF5I8043 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4237 MB |
