Handleiding
Je bekijkt pagina 11 van 15
Bluetooth Operation
P
air Bluetooth-enabled Devices
Note:
-
The operational range between this player and a Bluetooth device is approximately 8 meters (without any
object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
-
Switch to another function on the unit.
- Disable the Bluetooth function on your device.
- Press and hold the “
” b
utton on the unit.
Tips:
• Enter ”0000" for the password if necessary.
• The player will also be disconnected when your device is moved beyond the operational range.
• If you want to reconnect your device to this player, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please check if the device is
still connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Device
If your Bluetooth device supports A2DP, play music via your device.
• To pause/resume playback, press
.
•
To skip to a track, press
or
.
•
Press the VOL+/- button to increase or decrease the volume.
TWS Connection
1 Press the
on the unit to select Bluetooth mode.
2 The word “PAIRING“ will be shown on the display screen, the system has entered pairing mode.
3 Activate your Bluetooth device and select the search mode. “Hisense PARTY STORM 1”
will appear on
your Bluetooth device .
4 Select “Hisense PARTY STORM 1” in the pairing list, the system is successfully connected and the word
“CONNECTED” will scroll show on the display screen.
5 Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
• This TWS(TRUE WIRELE
SS STEREO) Bluetooth connection only use between the same two speakers.
• Power on both speakers, press
button on the both speakers to switch to Bluetooth mode, press TWS
button on the one of both speakers,the display screen of the speaker scroll display TWS ON, and then scroll
display TWS PAIRING ,the both speakers enter the pairing state automatically, once paired successfully,
one scrolls display MASTER
SLAVE
• Enable your Bluetooth device and make sure it is in searching mode.
• Select “Hisense PARTY STORM 1” from the list of discovered devices and connect to it.
• The master speaker will act as the left channel during TWS and will receive the Bluetooth signal, the other
speaker will act as the right channel to play music.
• Press and hold TWS button to disconnect the MASTER and the SLAVE speaker connection in TWS
connection mode, the display screen of the both speakers scroll display TWS OFF.
EN
11
Bekijk gratis de handleiding van Hisense PARTY STORM 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | PARTY STORM 1 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1247 MB |
