Handleiding
Je bekijkt pagina 21 van 33
21
Make sure the induction hob is well ventilated and that air inlet and outlet are not blocked. To avoid
accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock
during working, it is necessary to put a wooden insert, fixed by screws, at a minimum
distance
of 15mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes
are not blocked by the worktop when you put the hob into position.
•
Be aware that the glue that join the plastic or wooden material to the furniture, must
resist to temperature not below 150⁰C, to avoid the unstuck of the paneling.
•
The rear wall, adjacent and surrounding surfaces must therefore be able to
withstand an temperature of 90⁰C.
Before installing the hob, make sure that
•
The work surface is square and level, and no structural members interfere with space
requirements.
• The work surface is made of a heat-resistant and insulated material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable standards and
regulations.
•
A suitable isolating switch providing full disconnection from the mains power supply is
incorporated in the permanent wiring, mounted and positioned to comply with the local
wiring rules and regulations.
• The isolating switch must be of an approved type and provide a 3 mm air gap contact
separation in all
poles (or in all active [phase] conductors if the local wiring rules allow
for this variation of the requirements).
•
The isolating switch will be easily accessible to the customer with the hob installed.
•
You consult local building authorities and by-laws if in doubt regarding installation.
•
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall
surfaces surrounding the hob.
After installing the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers.
•
There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
•
If the hob is installed above a drawer or cupboard space, a thermal protection barrier is
installed below the base of the hob.
•
The isolating switch is easily accessible by the customer.
Min. 15mm
Max. 5mm
Max. 5mm
Bekijk gratis de handleiding van Hisense HI8532BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HI8532BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2838 MB |
