Hisense HFC743169BKA handleiding
Handleiding
Je bekijkt pagina 32 van 126
Vacuum cleaner
The motor unit can be removed from the floor cleaner by pressing the button on the rear of the cleaner, and it can be
transferred to the suction hose. // The vacuum cleaner is not suitable for vacuuming flammable particles, glass, water or
flammable liquids as it can damage the appliance or even cause it to catch fire. // Operation: ECO (up to 20 min) / AUTO (up
to 25 min). The display on the motor unit shows various functions. Each function is shown in the table.
Handheld vacuum cleaner
The motor unit also functions as a stand-alone unit. // Operation: HIGH (up to 20 min) / ECO (up to 35 min) / AUTO (up to
25 min). The display on the motor unit shows various functions. Each function is shown in the table.
USE
Brushes and attachments fit both the hose and the motor unit. // By pressing the button on the brushes and nozzles, you can
freely switch between them, as each is intended for different purposes. Brushes and attachments are inserted correctly when
they snap into place.
―
The floor brush is used for vacuuming all (dry) floor surfaces. Do not try to vacuum carpets with a high pile as the
fibres may become entangled in the roller brushes and damage the vacuum cleaner.
―
The crevice tool is intended for vacuuming narrower and more difficult-to-reach areas (corners, sofas, cobwebs,
behind radiators, etc.).
―
Nozzle with bristles (for window frames, drawers, etc.).
―
Nozzle with soft bristles (window frames, drawers, etc.).
―
Motorised brush for vacuuming fabric surfaces
CLEANING AND MAINTENANCE
1
Floor cleaner
Self-cleaning function
Place the floor cleaner with the motor unit on the charging station. // The charging station must be connected to the mains
power. The battery must be at least 20% charged for the self-cleaning function to operate correctly. // To clean, fill the clean
water tank and empty the dirty water tank. // On the handle of the motor unit, press the cleaning button. // Water automatically
flows from the spray section into the space where the cleaner is. The rollers are rotated and cleaned during the cleaning
process. // The rollers are cleaned at intervals of about 3 minutes. The cleaner is ready for the next cleaning. // If you have
finished cleaning, the function switches to the roller drying state. // During drying, you will hear the motor running gently. //
Roller drying takes about 3 hours. // If you notice that the rollers are not yet completely dry, you can restart the drying by
pressing the speed control button.
Cleaning and maintenance
After cleaning, it is recommended to empty the water reservoirs and clean them. // This prevents smells from stagnant water
and extends the service life of the appliance. // At the rear, remove the wastewater reservoir by pressing the button. //
Remove all parts and clean them. All parts are washable.
Remove the brush by pressing the button on the front of the cleaner. Lift out the clean water reservoir and drain the water.
Remove the rollers and rinse them with water and a mild detergent. This will remove any dirt that may still be on them. This
prevents bad smells that can emanate from rotting dirt. // If hair gets tangled on the rollers, we recommend that you cut the
hair out. Do not pull the hair, so as not to damage the rollers.
2
Vacuum cleaner
Remove the motor unit by pressing the button. // There is a button on the bottom of the container to remove the dust
container. // When removing the container from the motor unit, be careful not to drop and damage it. // Remove the filter
and the filter rim from the container and empty them. // The container, sleeve and filter can be wiped, shaken out, or
washed with lukewarm water. Be careful, as improper handling can damage parts of the vacuum cleaner. // Ensure that all
parts are completely dry before reinstalling the container on the appliance.
On the upper side of the brush tool, press the button and pull the roller out of the rim of the brush tool. // The roller is correctly
positioned when it snaps into place and the side pin is securely engaged in the brush housing.
To clean the fabric surfaces brush, there is a button on the side that you rotate. Then pull out the roller. // The roller is
correctly positioned when it snaps into place and the side pin is securely engaged in the brush housing.
If hair gets tangled on the rollers, we recommend that you cut the hair out. Do not pull the hair, so as not to damage the
rollers.
The included cleaning brush helps to clean the hard-to-reach areas. // These removable parts can be washed under running
water. // We recommend that you ensure all parts have dried thoroughly before reuse in order to maintain the condition of
the appliance. // Never clean without all the main parts.
3
Replacing the filter
If you notice that the filter is damaged, replace it immediately. With regular use, we recommend replacing the filter every 6
months to ensure the longest possible service life of the vacuum cleaner.
32
Bekijk gratis de handleiding van Hisense HFC743169BKA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | HFC743169BKA |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 15255 MB |
