Hilti SPN 6‑22 handleiding
Handleiding
Je bekijkt pagina 13 van 72
*2331867*
2331867 6
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the
relevant operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries. 14
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
Description
Product overview 1
@
Lockable on/off switch
;
Grip
=
Adjusting knob for speed
%
Battery status indicator
&
Battery release button
(
Battery
)
Dust filter
+
Indexing pin
§
Die carrier
/
Securing screws
:
Die
∙
Cover ring
$
Punch
£
Punch guide
|
Casing
¡
Accessory tool, SPN-CN
Q
Accessory tool, SPN-RN
W
Accessory tool, SPN-RL
Intended use
The product described is a hand-held cordless nibbler. It is designed for cutting sheet-like workpieces
out of punchable materials such as steel, aluminum, non-ferrous metal and plastic, for nibbling
straight or curved outside edges and cut-outs and for nibbling along marked lines of cut. The nibbling
process produces distortion-free cut edges. Other applications are possible as well, depending on
the accessory tool used.
SPN-CN: This accessory tool is also designed for cutting pipes, nibbling corrugated metal and
nibbling with a template. The hollow round punch enables the nibbler to be rotated about its own
axis so that nibbling can proceed in any direction.
SPN-RN and SPN-RL: These accessory tools are also designed for cutting sheet metal profiles such
as trapezoidal sheet metal, corrugated sheet metal, box-section sheet metal and angled moldings.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum
performance, Hilti recommends the batteries stated in the table at the end of these operating
instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
Items supplied
Nibbler, Torx wrench, operating instructions
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with the product can be
found at your local Hilti Store or online at: www.hilti.group
Bekijk gratis de handleiding van Hilti SPN 6‑22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | SPN 6‑22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6307 MB |
