Hilti SPN 6‑22 handleiding
Handleiding
Je bekijkt pagina 12 van 72
5 2331867
*2331867*
▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool
presents a risk of injury (cuts or burns).
▶ Take frequent breaks and do physical exercises to improve the blood circulation in your fingers.
High vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
▶ Wear eye protection, a hard hat and ear protection while the product is in use.
▶ Switch the product on only after you have brought it to the working position.
▶ Wait until the product has come to a complete stop before you lay it down.
▶ Do not work overhead with the product.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and
installed accessories are secure.
▶
Do not secure a belt hook to this power tool.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
Electrical safety
▶ Have dirtied or dusty products that are used frequently for working on conductive materials checked
at regular intervals by Hilti Service. Dust, especially dust from conductive materials, or dampness
on the surface of the product can, under unfavorable conditions, lead to electric shock.
▶ Clean the ventilation slots on the power tool at regular intervals. The motor’s fan will draw dust
inside the housing and an excessive accumulation of metal dust may cause electrical hazards.
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present. External metal parts of the product
can become live, for example if you inadvertently damage electric wiring.
▶ Do not attempt to cut workpieces that could be electrically live.
Work area safety
▶ Keep the work area clean and tidy. Metal swarf is sharp and can scratch the floor surface.
Careful handling and use of electric tools
▶ Make sure that there is no swarf or dirt on the product. When working, make sure that no swarf
makes its way into the area of the on/off switch. The swarf could block the on/off switch, rendering
it impossible to switch the product off.
Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or
explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over
80 °C (176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way.
Check your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame.
This can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive
objects. This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
Bekijk gratis de handleiding van Hilti SPN 6‑22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | SPN 6‑22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6307 MB |
