Hilti AG 600-20SE handleiding
Handleiding
Je bekijkt pagina 22 van 80
16 English 2381081
*2381081*
9 Transport and storage
Transport
▶ Do not transport this product with an accessory tool installed.
▶ Make sure that the equipment is held securely throughout all transport operations.
▶ After transporting, always check all visible parts and controls for signs of damage and make sure that
they all function correctly.
Storage
▶ Always store this product with the electric supply cable unplugged from the electricity supply.
▶ Store this product in a dry place, where it cannot be accessed by children or unauthorized persons.
▶ After a long period of storage, always check all visible parts and controls for signs of damage and make
sure that they all function correctly.
10 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to rectify the problem by
yourself, contact Hilti Service.
Trouble or fault Possible cause Action to be taken
Product does not start. Interruption in the electric supply. ▶ Plug in another power tool or
appliance and check whether it
works.
The supply cord or plug is defec-
tive.
▶ Have the supply cord and plug
checked by a trained electrical
specialist and replaced if
necessary.
Product does not work. Product is overloaded. ▶ Release the on/off switch and
then press it again. Then allow
the product to run under no load
for approx. 30 seconds.
Product does not develop full
power.
The extension cord conductor
cross section (gauge) is inade-
quate.
▶ Use an extension cord with
an adequate conductor cross
section.
The product can’t be
switched on.
Product is overloaded. ▶ Release the on/off switch and
then press it again. Then allow
the product to run under no load
for approx. 30 seconds.
The angle grinder gets very
hot.
Electrical fault ▶ Switch the product off immedi-
ately, keep it under observation,
allow it to cool down and con-
tact Hilti Service.
Clogged air vents ▶ Regularly clean the air vents.
Elevated temperatures at the
gear housing.
Short braking interval. ▶ Allow the device to run under no
load until it has cooled down.
The motor has no braking
effect.
Product is momentarily overload-
ed.
▶ Switch the product off and then
on again.
The motor has no braking
effect.
Product is momentarily overload-
ed.
▶ Switch the product off and then
on again.
11 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
Bekijk gratis de handleiding van Hilti AG 600-20SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | AG 600-20SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8376 MB |
