Hilti AG 600-20SE handleiding
Handleiding
Je bekijkt pagina 16 van 80
10 English 2381081
*2381081*
Item
Equipment
AC-D AP-D
AG-D
AF-D
AN-D
DG-CW
(SPX/
SP/P)
DC-D
(SPX/
SP/P)
3CS/4CS
3SS/4SS
AG-D
5⁄8"-11
B
Front cover
(in combination with
A)
✓ — — — ✓ — —
C
Dust hood (grinding)
DG-EX 125/5"
— — — ✓ — — —
D
Dust hood (cutting)
DC-EX 150/6"C
(in combination with
A)
— — — — ✓ — —
E
Dust hood (slitting)
DC-EX 125/5"M
— — — — ✓ — —
F
Side handle
(standard)
✓ ✓ ✓ ✓ ✓ ✓ ✓
G
Clamping nut
(standard)
✓ — ✓ ✓ ✓ — —
H
Clamping flange
(standard)
✓ — ✓ ✓ ✓ — —
I
Kwik lock
(optional for G)
✓ — ✓ — ✓ — —
J
Clamping nut
(abrasive resin-fiber
wheel)
— ✓ — — — — —
K
Support plate
(abrasive resin-fiber
wheel)
— ✓ — — — — —
L Guard type 27 — — — — — — ✓
4 Product information
For rated voltage, rated current, frequency and/or input power, refer to the rating plate.
If the product is powered by a generator or transformer, the generator or transformer’s power output must
be at least twice the rated input power shown on the rating plate of the product. The operating voltage of
the transformer or generator must always be within +5 % and -15 % of the rated voltage of the product.
ATTENTION! For working with a 150 mm accessory tool, a 150 mm guard (supplied separately) must
be used.
AG 60020SE
Product generation
01
Rated speed under no load
10,000 /min
Maximum wheel diameter
6 in
Drive spindle thread
5/8"-11
Spindle length
22 mm
Weight
2.5 kg
(5.5 lb)
Bekijk gratis de handleiding van Hilti AG 600-20SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hilti |
| Model | AG 600-20SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8376 MB |
