High One STEAMBOOST-03.2 handleiding
Handleiding
Je bekijkt pagina 9 van 44
7
EN
Correct placement of iron on the thermal insulation stand
When the iron is put on the thermal insulation stand, it must be placed on it correctly (see Fig.3).
Fig.3
Using your steam station
The appliance has two ironing ways. You can use dry ironing or steam ironing, the details
refer to the following.
Dry ironing
1. Put the unit base on a stable and level surface.
2. Put the iron on the thermal insulation stand of unit base correctly (see Fig.3).
3.
Connect the plug to wall outlet, and then turn the temperature dial to select your desired
temperature setting, which is depended on the fabric of garment. Refer to “Ironing tips”
and “Additional table” as below when select temperature.
4. And then the temperature indicator illuminates and the iron starts heating.
5. When the temperature of soleplate reaches the selected temperature, the temperature
indicator turns off, and you can start ironing now.
WARNING: Never touch hot soleplate at any time before cooling down!
Steam ironing
1. Put the unit base on a stable and level surface.
2. Grasp the water tank handle and then pull out the water tank horizontally, fill the water
tank with water through the filling aperture and then replace the water tank well in position
(see Fig.4). Make sure the water tank shall be pulled out horizontally when removing the
water tank. You had better use purified water with less calcium particles. The maximum
capacity of water tank is 1.2L, the water level shall not be exceeded the maximum level.
Product usage
B
Bekijk gratis de handleiding van High One STEAMBOOST-03.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | High One |
| Model | STEAMBOOST-03.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3061 MB |
