High One STEAMBOOST-03.2 handleiding
Handleiding
Je bekijkt pagina 10 van 44
8
EN
Grasp the water
tank handle
Remove the water
tank horizontally
Fill the water tank
with water
Replace the water
tank
Fig.4
3. Put the iron on the thermal insulation stand of unit base correctly (see Fig.3).
4.
Connect the plug to wall outlet, and then turn the temperature dial to select your desired
temperature setting, which is depended on the fabric of garment. Refer to “Ironing tips”
and “Additional table” as below when select temperature.
5. And then the temperature indicator illuminates and the iron starts heating.
6. After one minute, the temperature indicator extinguishes, which indicates the soleplate
temperature has achieved the selected temperature. And you can start ironing with
steam now.
7. Press the steam trigger with a little force, the steam will be sprayed from the soleplate
continuously, and then you can iron the garment with steam.
NOTE: There may be dripping water during spraying steam when the temperature
is lower than that of the second setting. This is normal.
CAUTIONS:
• Do not touch hot soleplate at any time before cooling down!
• Never direct the steam at people!
• Do not activate the steam function when the iron is placed on the unit base to
avoid being scalded by steam.
8. After ironing, remove the plug from the wall socket and the appliance will be turned off.
But the soleplate is still hot, never touch it with hand, place it on the thermal insulation
stand correctly until it cools down completely.
Ironing tips
•
Always check first whether a label with ironing instructions is attached to the article.
Follow these ironing instructions in any case.
•
The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lower temperature such as those made of synthetic fiber.
• If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
• Synthetic fibre and silk fabrics should be ironed on their inner side to avoid being shone.
•
Velvet and other textures that rapidly become shiny should be ironed in one direction with
light pressure applied. Always keeps the iron moving at any moment.
•
Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth as a
mat and then select the corresponding fabric setting for ironing.
Product usage
B
Bekijk gratis de handleiding van High One STEAMBOOST-03.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | High One |
| Model | STEAMBOOST-03.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3061 MB |
