Hertz CAPRI H100 handleiding
Handleiding
Je bekijkt pagina 22 van 60
CJ
LOUDNESS (to compensate for deficiencies in the low/high frequencies at low volume level)
- Press KNOB to enable
or disable this function.
CROSSOVER (HPF) (to set the high pass cutoff filter frequency for ZONE 2 L/R).
- Rotate the KNOB to highlight the desirer value (60Hz > 80Hz > 100Hz > FULL), press to select.
SUBWOOFER (ZONE 2 SUB settings)
- Rotate KNOB to highlight one of the available options, press to select
(SUBW VOLUME LEVEL > SUBW CROSSOVER (LPF) > SUBW POLARITY)
SUBW VOLUME LEVEL
- Rotate KNOB to adjust the level from -30 to +10.
SUBW CROSSOVER (LPF) (to set SUB the low pass filter)
- Rotate KNOB to highlight one available option, press to select: (FREQUENCY>SLOPE).
FREQUENCY (to set the SUB low pass cutoff filter frequency)
Rotate the KNOB to highlight the desired value (60Hz>80Hz>100Hz>FULL), press to select.
SLOPE (to set the SUB low pass filter slope)
Rotate the KNOB to highlight the desired value (-12dB/oct>-24dB/oct), press to select.
SUBW POLARITY (to set the SUB phase)
- Rotate the KNOB to highlight ( 0° or 180°), press to select.
MAX VOLUME LIMIT (to limit the maximum volume output of this zone).
- Rotate KNOB to adjust the desired Volume level limit from 0 to 40.
POWER ON VOLUME LIMIT (to limit the maximum volume level of this zone when the head unit is
turned ON).
- Rotate KNOB to adjust the desired Volume level upon turn on from 0 a 40.
LEVEL CONTROL MODE
Rotate KNOB to highlight one of the available options, press to select:
- VARIABLE (default): the volume level of the signal output from this audio zone is variable and can be
controlled via the volume mixer (AUDIO ZONE LEVEL).
- FIXED @4Vrms: the level of the output signal from this audio zone is fixed at 4Vrms. It will no longer
be possible to change the volume level for this zone until the “Variable” mode is selected.
- FIXED @2Vrms: the level of the output signal from this audio zone is fixed at 2Vrms.
It will no longer be possible to change the volume
level for this zone until the “Variable” mode is
selected.
- FIXED @1Vrms: the level of the output signal from this audio zone is fixed at 1Vrms.
It will no longer be possible to change the volume level for this zone until the “Variable” mode is
selected.
Bekijk gratis de handleiding van Hertz CAPRI H100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hertz |
| Model | CAPRI H100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9227 MB |