Hendi 230664 handleiding
Handleiding
Je bekijkt pagina 11 van 116
11
GB
use the device.
• Clean the accessories and the appliance before use (See
==> Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resist
-
ant surface that is safe against water splashes.
•
Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may
emit a light odor during the first few uses. This is normal and
does not indicate any defect or hazard. Make sure the appli
-
ance is well ventilated.
Operating instructions
• IMPORTANT! This machine has a specially designed safety
feature: Protective cover.
The machine can only operate when the protective cover is
closed and the jug is installed properly on the motor base.
• NOTE! For safety reason, the machine can only start to op
-
erate with the jug installed properly on the motor base and
the pr
otective over is closed properly.
• Check if the machine is at the STANDBY mode.
• Unplug the machine and open the protective cover, take out
the jug from the motor base.
• Pour all the ingredients into the jug and close it with the jug
lid and place the cover cap correctly in place.
• Place the whole jug onto the motor base & close the pro
-
tective cover.
•
Connect the power plug to a suitable electrical power supply
socket.
• Press the power switch once to enter STANDBY mode.
Then, press the power switch again to switch ON the ma
-
chine and 20 (Note: Default speed is 20) will be shown on the
digit
al control display or select a suitable speed by pressing
the desired speed control button:
/ / will then be shown
on the digital control display correspondingly.
• Select the time for operation (30s / 45s / 90s) by pressing the
timer button. Remaining time will be shown on the digital
control display. Once the set time is elapsed, the machine
will stop operation and go to STANDBY mode.
• After use, always press the power switch to STANDNY mode
and disconnect the plug from the electrical socket.
NOTE! The digital control panel has 2 level for brightness.
When you press, it will be brighter. Otherwise, it will remain in
minimum brightness mode.
Speed selected Description
Speed
control
button
Low speed (
)
For mixing liquids
Medium (
) and
high (
) speed
For mixing liquids and
solid ingredients
Pulse function
For ice crushing or short,
power impulse movements.
Note: Use the pulse func-
tion for 1 ~ 2 seconds each
time. Repeat
ed about sev-
eral times if necessary.
Remarks:
1. For the best results when blending solid foodstuffs, only
add small portions in succession, not all ingredients at the
same time.
2. Always start with lower speed (
). If necessary, then
switch to the high speed (
) or to the “Pulse” function, so
as not to jam the blade assembly.
3. Do not use this machine to blend hard foodstuff, such as
nuts.
4. Do not fill liquids above the MAX. mark of the jug.
5. Liquids to be blend should be at or below room temper
-
ature. If you are going to blend warm liquids, ensure that
the jug lid is c
orrectly in place and use low speed for pro-
cessing. Risk of burns and be careful.
6.
Avoid long period of operation due to the loud noise that
may hurt the hearing.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the
power supply and cool down before storage, cleaning &
maintenance.
• Do not use water jet or steam cleaner for cleaning and do
not push the appliance under the water as the parts will get
wet and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness,
this can adversely affect the life of the appliance and result
in a dangerous situation.
• Food residues should be regularly cleaned and removed
from the appliance. If the appliance is not cleaned proper
-
ly, it will reduce its lifespan and may result in a dangerous
c
ondition during use.
• DANGER OF INJURY! Care should be taken when handling
the sharp cutting blades during cleaning.
Cleaning
Cleaning of the jar
• Pour lukewarm water and a mild non foaming detergent
into the jar.
• Place the lid onto the jar.
• Place the jar on to the motor unit.
• Switch the motor unit on at full speed for 10-20 seconds.
• Switch off the motor unit.
• Remove the jar from the motor unit.
• Rinse the jar thoroughly with clean water.
• In case of residue stuck to the knife carefully clean with a
small knife or tweezers. Never clean the knife with your
bare hands.
• Dry the in- and outside of the jar.
• After cleaning disinfect the jar. Use the instructions of the
disinfectant manufacturer.
• Store the jar upside down.
• The underside of the jar may never come into contact with
any fluid!
• WARNING: Never disassemble parts of the jar and cutting
unit.
• WARNING: Never clean any parts of the appliance in the
dishwasher.
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned
before and after use.
Bekijk gratis de handleiding van Hendi 230664, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hendi |
| Model | 230664 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18299 MB |
