Hendi 223659 handleiding

56 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 56
20
EN
8. DIGITAL OVEN CONTROL PANEL
Only model HENDI: 223291, 223277, 223253, 223239, 223215
K5 Encoder for regulation “ + / -“
L1 Thermostat light
L2 Humidification Light
L4 Timer led
L6 Cooking cycle led
L7 Chimney exhaust led
L8 Core probe led
L9 DELTA T led
B1 Temperature selector
B2 Steam selector
B3 ON /OFF button
B4 Timer selection
B5 Cooking programs
B7 Chimney exhaust selector
B8 Core probe selector
B9 DELTA T selector
B10 START / STOP cooking
B11 Speed regulation
C1 Core probe inlet
ON/OFF
When power is supplied to the oven the control
panel lights up and the operating display indicates
off. Activating the control panel requires pressing
the on/off.
TEMPERATURE SELECTOR
Press Temperature button, set the temperature
value by acting on the encoder knob. It rotates
clockwise and anticlockwise, thus it increase or
reduces the temperature which appears on the
temperature display and press the knob for con-
firmation. The oven will show always the real tem-
perature inside the cooking chamber. To see what
temperature was confirmed press the temperature
button.
CORE PROBE
For cooking with core probe you need to fit the un-
der position, press the core probe button and set
the temperature value by acting on the encoder
knob + press for confirmation.
The oven turns off when the inserted core probe
registers the food temperature requested.
B9
L9
L2
L6
B2
B10
B8
L8
L7
B7
B11
B1
L1
L4
B4
B5
B3
K5
C1
DELTA T
For cooking with Delta T you need to press the Del-
ta T button and:
a) set the temperature value of core probe by acting
on the encoder knob + press for confirmation
b) set the temperature value of cooking chamber
(difference you want from core probe and cooking
chamber) by acting on the encoder knob + press
for confirmation
Remember that you need to fit the core probe at
the oven before starting this selection
CHIMNEY EXHAUST SELECTOR
Press the exhaust button and set the percentage of
open/close for the chimney acting on the encoder
knob + press for confirmation.

Bekijk gratis de handleiding van Hendi 223659, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHendi
Model223659
CategorieOven
TaalNederlands
Grootte5773 MB