Handleiding
Je bekijkt pagina 12 van 81
www.heinner.com
11
Stopwatch Indication Status
On: Timer alarm active.
Flashing: Timer setting mode, setting possible with the buttons + or - or stopwatch
alarm set.
Off: The stopwatch is not active.
Child Lock Indication
On: The Child Lock function is active.
Off: The Child Lock function is active
START
The hour flashes on power-up. The indicated time is not correct and needs to be adjusted
TIME ADJUSTMENT
Press + and - simultaneously for 3 seconds to enter the adjustment mode and then the hour and minute
digits will start flashing. Using + and - you can adjust the desired duration. The maximum adjustable duration
is 23 hours and 59 minutes.
The adjustment mode will be exited in 6 seconds after the last button press or can be ended immediately by
pressing the button.
Note: The Time Adjustment is also activated within the first 7 seconds after power is on.
SETTING THE TIMER
With this function, you can set a duration in minutes. After the adjusted time has elapsed, an alarm sound
will be produced.
Press the button once to enter timer setting mode, the symbol will start flashing on the display. Using
+ or - , adjust the desired duration. The stopwatch intervals are between 10 seconds and 99 minutes and 50
seconds, the display will therefore show 1 hour and 40 minutes and the adjustment will be in one minute
steps up to 24 hours.
The adjustment mode will be exited in 6 seconds after the last button press or can be ended immediately by
pressing the button.
CANCEL ALARM SOUND
Once the adjusted timer time has elapsed, the alarm will start sounding, accompanied by the flashing
symbol on the display. Any button press will stop the alarm sound and this indication. If no button is pressed,
the alarm sound will automatically stop after 5 minutes, but the flashing symbol will continue.
IF THE ELECTRICAL CONNECTION FAILS
The product is not affected by short-term power interruptions (shorter than 50 seconds), the timers and
clock continue to operate in the meantime.
CHILD LOCK
This function is intended to prevent any unauthorized changes to the timer settings. This function will be
active, 30 seconds after the last button press. Will appear. To deactivate it, press the button for 3
seconds. will disappear.
Bekijk gratis de handleiding van Heinner HFSC-S66FDC-BIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HFSC-S66FDC-BIX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 17897 MB |
