Handleiding
Je bekijkt pagina 8 van 51
www.heinner.com
7
Information
Recirculation mode, the cabinet needs an air vent.
Recirculation mode, always be with activated carbon filter.
Recirculation mode, when activated carbon filter attached, the suction power will be lowered.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ɸ
150 or ɸ 120 mm, the choice of which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not supplied).
Remove possible charcoal filters.
CHIMNEY ASSEMBLY
The chimney can only be installed with exhausting hood.
Lower Decorative Chimney
Fix a Chimney fixing bracket 21 onto the Lower Decorative Chimney with 2 screws 12 (4.2 x 9.5) supplied with
the hood.
Hook the brackets 13 onto the hood body and fix them with 2 screws 12 (4.2 x 9.5), making sure that they
are well seated.
Slightly widen the two sides of the lower chimney and hook then between the brackets 13, fix the lower
chimney onto the brackets 13 with 2 screws 12 (4.2 x 9.5) supplied with the hood.
Bekijk gratis de handleiding van Heinner HDCH-MD620RGBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HDCH-MD620RGBK |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 10967 MB |
