Handleiding
Je bekijkt pagina 7 van 42
www.heinner.com
6
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ɸ
150 or ɸ 120 mm, the choice of which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not supplied).
Remove possible charcoal filters.
Upper Decorative Chimney (Only Apply For Upper Decorative Chimney)
Insert the upper decorative chimney 2.2 into the lower decorative chimney 2.1 and drag it up to the
horizontal line B
Connect upper decorative chimney 2.2 and chimney fixing bracket 21 with 2 screws 12 .
6. MAINTENANCE
GREASE FILTERS
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage,
and can be washed in a dishwasher.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously
pulling downwards.
• Any kind of bending of the filters has to be avoided when washing them. Before fitting them again into
the hood make sure that they are completely dry. (The color of the filter surface may change throughout
the time, but this has no influence to the filter efficiency).
• When fitting the filters into the hood pay attention that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
Bekijk gratis de handleiding van Heinner HDCH-MD60TIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HDCH-MD60TIX |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8444 MB |
