Handleiding
Je bekijkt pagina 11 van 57
www.heinner.com
10
For draining, place a tray beneath the outer drain plug.
Pull out the drain dial .
Rotate the drain dial 180 degree. This will let the water flow out in the tray.
When done, push the drain dial in. Re-plug the drain plug inside the freezer.
Note: Monitor the container under the drain to avoid overflow.
Wipe the interior of the freezer and replace the electrical plug in the electrical outlet.
Reset the temperature control to the desired setting.
13. TROUBLESHOOTING
Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent
person must do the troubleshooting that is not in this manual.
Important! There are some sounds during normal use (compressor, refrigerant circulation).
Problem
Possible Cause
Solution
Appliance does not work
Mains plug is not plugged in or is
loose
Insert mains plug
Fuse has blown or is defective
Check fuse, replace if necessary
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too warm
Temperature is not properly
adjusted.
Please look in the initial
Temperature Setting section
Door was open for an extended
period
Open the door only as long as
necessary
A large quantity of warm food was
placed in the appliance within the
last 24 hours
Turn the temperature regulation to
a colder setting temporarily.
The appliance is near a heat source
Please look in the installation
location section
Bekijk gratis de handleiding van Heinner HCF-HM246CSE++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HCF-HM246CSE++ |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 11515 MB |
