Handleiding
Je bekijkt pagina 7 van 88
www.heinner.com
6
• These reduce the ferromagnetic area, which means that less power is emitted to the Cookware. This
cookware may not be sufficiently detected or may not be detected at all, and therefore does not heat
sufficiently.
• If the base of the pan is similar to the pictures below the pan may not be detected.
• Do not use cookware with jagged edges or a curved base.
• Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking
zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a slightly wider
energy will be used at its maximum efficiency. If you use smaller pot efficiency could be less than expected.
Pot less than 140 mm could be undetected by the hob. Always center your pan on the cooking zone.
• Always lift pans off the Induction hob – do not slide, or they may scratch the glass.
How to use the hob
1. Start cooking
1. Touch the ON/OFF control. After power on, the buzzer beeps once, heating zone selection controls show
“-” or “--“, indicating that the induction hob has entered the state of standby mode.
2. Place a suitable pan in the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and the indicator next to the key will flash
Bekijk gratis de handleiding van Heinner HBHI-M2ZB1FXTC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBHI-M2ZB1FXTC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 15965 MB |
