Handleiding
Je bekijkt pagina 19 van 88
www.heinner.com
18
8. TROUBLESHOOTING
Problem
Possible cause
What to do
The induction hob
cannot be turned on.
No power.
Make sure the induction hob is
connected to the power supply and
that it is switched on.
Check whether there is a power
outage in your home or area. If
you’ve checked everything and the
problem persists, call a qualified
technician.
The touch controls
are unresponsive.
The controls are locked.
Unlock the controls. See section
‘Using your ceramic cooktop’ for
instructions.
The touch controls
are difficult to
operate.
There may be a slight film of water over
the controls, or you may be using the tip
of your finger when touching the
controls.
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or cleaning
products being used.
Use cookware with flat and smooth
bases.
Some pans make
crackling or clicking
noises.
This may be caused by the construction
of your cookware (layers of different
metals vibrating differently).
This is normal for cookware and
does not indicate a fault.
The induction hob
makes a low
humming noise
when used on a high
heat setting.
This is caused by the technology of
induction cooking
This is normal, but the noise should
quieten down or disappear
completely when you decrease the
heat setting.
Fan noise coming
from the induction
hob.
A cooling fan built into your induction
hob has come on to prevent the
electronics from overheating. It may
continue to run even after you’ve turned
the induction hob off.
This is normal and needs no action.
Do not switch the power to the
induction hob off at the wall while
the fan is running.
Pans do not become
hot and appears in
the display.
The induction hob cannot detect the pan
because it is not suitable for induction
cooking.
The induction hob cannot detect the pan
because it is too small for the cooking
zone or not properly centered on it.
Use cookware suitable for induction
cooking.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds, and an error
code is displayed
(typically alternating
with one or two
digits in the cooking
timer display).
Technical fault.
Please note down the error letters
and
numbers, switch the power to the
induction hob off at the wall, and
contact a qualified technician.
Bekijk gratis de handleiding van Heinner HBHI-M2ZB1FXTC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBHI-M2ZB1FXTC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 15965 MB |
