Heinner CH-MD200WH handleiding

43 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 43
www.heinner.com
4
5. INSTALLATION
Wall drilling and bracket fixing
Please read the instructions carefully.
Unpack the canopy and check that all functions are working. Ensure that the voltage (V) and the
frequency (Hz) indicated on the serial plate match the voltage and frequency at the installation site.
Check that the area behind the installation surface to be drilled is clear of any electrical cables or pipes,
etc.
The stainless steel and glass surfaces of the canopy are very easily damaged during installation if grazed
or knocked by tools. Please take care to protect the surface during installation.
Protect the cooktop surface below with cardboard, or the like, to prevent damage occurring whilst the
wall canopy is installed above.
The manufacturer shall not be liable for failure to observe all safety regulations in force for the correct
and normal operation of electrical parts.
Choose a venting mode
Extraction-air mode Recirculation mode Venting knob position
Extraction-air mode: Turn the venting
knob here means venting outside
Circulationg-air mode: Turn the venting
knob here means recirculating
Information
Sufficient air is needed for proper combustion and exhaustion of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Ductless fans must always be vented outdoors.
When assessing the air pressure, the entire ventilation system in the house/apartment must be
considered, e.g. hob and/or gas cooker, this rule does not apply.
Government regulations must be observed for the conveyance of exhaust air. If the extractor hood is
used in circulating air mode with activated carbon filter, there are no operating restrictions.
If you choose extraction-air mode, there are two methods for ventilation, including ‘horizontal
ventilation ‘and ‘vertical ventilation ‘. Please use the tool to take out the cover before using it and install
check valve on the hole.
The square air check valve for horizontal ventilation is not supplied.

Bekijk gratis de handleiding van Heinner CH-MD200WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHeinner
ModelCH-MD200WH
CategorieAfzuigkap
TaalNederlands
Grootte9515 MB