Hazet 9012PTT handleiding
Handleiding
Je bekijkt pagina 17 van 28
17
[
+49 (0) 21 91 / 7 92-0 •
^
hazet.de •
]
export@hazet.de
• Never clean with solvents or acids, esters
(organic compounds comprising acids
and alcohol), acetone (ketone), chlorinated
hydrocarbons or oils containing nitro
hydrocarbons. Do not use any chemicals
with a low burning point.
• For customer service, please contact your
distributor or the HAZET Service Centre.
5. Malfunctions
If faults occur, check the following:
• Compression system and compressed air
supply line, air requirement l/min and hose
diameter according to the technical data of
the tool
• Check the compressed air for the occurrence
of dust, condensate and rust particles
• Excess lubrication of the air motor
4. Maintenance and care
Lubrication:
• Air tools must be oiled for their entire lifetime.
The motor and the ball bearings require
compressed air to operate the tool. Since
the moisture in the compressed air corrodes
the motor, the motor must be lubricated
every day. For this purpose, use of a HAZET
9070-2 maintenance unit is recommended.
• Lubricating the pneumatic motor by hand:
Disconnect tool from the air supply and
hold with the air inlet pointing upwards.
Put
one
to two drops of special pneumatic tool oil
(9400-100)
in the air inlet
.
• Connect the tool to the compressed air supply;
cover the air outlet on the tool with a towel
and operate for a few seconds.
• Never use combustible or easily evaporable
liquids such as kerosene, diesel or petrol to
lubricate the tool.
CAUTION!
Always disconnect the tool from the
compressed air supply prior to carrying
out maintenance work.
CAUTION!
Excess oil in the motor will be
expelled through the air outlet.
• If used daily, carry out maintenance every
three months, or every 1000 operating hours
at the latest.
• Damaged or worn components such as
O-rings and bearings, etc. must be replaced
and all moving parts must be lubricated.
• Only use spare parts recommended by
the manufacturer, as any other parts will
invalidate any express or implied warranty.
• Ensure that the relevant environmental
protection regulations are observed when
disposing of individual parts, lubricants and
oils, etc.
3
Design and function
Always wear personal protective equipment!
Bekijk gratis de handleiding van Hazet 9012PTT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9012PTT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5987 MB |
