Hazet 9012PTT handleiding
Handleiding
Je bekijkt pagina 16 van 28
16
^ hazet.com • ] info@hazet.de
• Press the operating lever to activate the tool.
• Release the operating lever to stop the tool.
• Please note that the tool still carries on
running after the operating lever has been
released.
• The direction of rotation is controlled via
the changeover switch on the rear of the
housing; single-stage clockwise rotation,
single-stage anti-clockwise rotation
• After completing the operation, switch off
the compressor and store it in accordance
with the operating instructions of
the compressor.
• Only use clean and dry air at a max.
pressure of approx. 90PSI or 6.3bar. Dust,
flammable vapour and high humidity can
result in damage to the pneumatic tool's
motor.
• Do not remove any stickers and replace
damaged stickers.
• Keep hands, loose clothing and long hair
away from the tool's moving part.
• Maximum efficiency due to the groundbreaking
HAZET Twin Turbo technology enables high
torques with compact design
• Innovative 8-blade air motor with 25% higher
impact performance ensures maximum
torque.
• Long service life and high efficiency in
industrial and automotive applications.
• Compact design, optimised for work in
confined spaces
2. Before starting the operation
The pneumatic tools must always
be used, inspected and maintained
in compliance with the local
government, state or federal
regulations.
• Drain the compressor tank and remove the
condensate from the air lines. Carefully read
through the operating instructions for the
compressor.
IMPORTANT:
Use of a HAZET 9070-2
maintenance unit is strongly
recommended.
CAUTION!
Disconnect the compressed air supply
prior to lubricating, connecting or
disconnecting the tool.
• Oil the tool daily!
• Remove the dust cap on the compressed
air inlet.
• Connect the tool to a hose of suitable size.
Table on page 15.
3. Operation
• Switch on the compressor so that the air
tank can be filled.
• Turn the compressor regulator to approx.
90 PSI or 6.3 bar. The max. working
pressure of this tool is approx. 90 PSI or
6.3bar.
• The power may vary depending on the size
of the air compressor and the volume of the
compressed air output.
• Do not use damaged or worn air hoses or
adapters of inferior quality.
• The technical data provided refer to an
operation of the tool at a pressure of 6.3bar.
• Caution is required at all times when using
the tool. Negligent operation may cause
damage to the inner parts or the housing
and limit the working performance.
3
Design and function
Twin Turbo
2 x exhaust inlet
4 x exhaust outlet
Always wear personal protective equipment!
Bekijk gratis de handleiding van Hazet 9012PTT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9012PTT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5987 MB |
