Hazet 4935-11/12 handleiding
Handleiding
Je bekijkt pagina 12 van 20
12
Please secure separate parts against falling off!
Do not reach into the device during operation!
2
For your safety
1. Owner's liability
This HAZET tool was developed and manu-
factured according to the technical norms
and standards valid at this time and is consid
-
ered to be operationally reliable. Nevertheless,
risks may arise when the tool is not used as
intended or is used in an inappropriate way
by unqualified personnel. Before beginning
work, any person using this tool or carrying
out maintenance work must carefully read the
operating instructions, application notes and
safety instructions and fully understand all
information given.
• Keep the operating instructions, application
notes and safety instructions together with
the tool at all times.
• Modifications of any type as well as fittings
or alterations to the HAZET tool are strictly
prohibited.
• All indications concerning setting values
and setting ranges must be observed or
requested from the vehicle manufacturer.
• This tool is intended exclusively for use by
experienced mechanics.
These instructions are provided
as a guide only. Always make
sure that you have a copy of the
appropriate vehicle manufactur
-
er's service instructions, or another appro-
priate manual that provides the correct
information necessary to properly execute
the work.
2. Intended use
Operational reliability can only be ensured if
the tool is used as intended and in compli
-
ance with the indications given in the operat-
ing instructions, application notes and safety
instructions. In addition to the safety advice in
these operating instructions, the general safe
-
ty regulations, regulations for the prevention
of accidents and regulations for environmen
-
tal protection valid for the application area of
this device must be observed and respected.
• Silent block and wheel bearing tools must
only be used if in good working condition.
• Safety equipment must always be within
easy reach and should be checked regu
-
larly.
• You will find the practical application in the
application note.
• The intended use of the silent block and
wheel bearing tools is described in the
corresponding operating instructions and
application notes.
• Incorrect use of the product tools or use
whilst failing to comply with the safety
instructions can result in serious injury or
death.
• Any deviation from the intended use and/or
any misapplication of the tool is not allowed
and will be considered as improper use.
• Any claims against the manufacturer and/or
its authorised agents because of damage
caused by improper use of the tool are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
Bekijk gratis de handleiding van Hazet 4935-11/12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 4935-11/12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5106 MB |
